Answer the following questions in about 150 words each :
Briefly discuss the criteria for irrigation scheduling in crop plants.
10 marks · answer in 150 words · directive: Briefly discuss
The core of a good answer
Irrigation is scheduled by one of four kinds of criteria: soil moisture (depletion of available soil moisture or soil water tension), climate (IW/CPE ratio or crop evapotranspiration), plant indicators (visual signs, leaf water potential, canopy temperature) and critical growth stages; in practice they are combined.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
Irrigation scheduling answers when to irrigate and how much water to apply. The answer should list the criteria with their basis, a typical threshold value for each, and their merits or limits, ending with which are practical for farmers.
Answer outline
Introduction
Irrigation scheduling is deciding the time and depth of irrigation so that the crop does not suffer stress and water is not wasted; the criteria fall into soil, climatic, plant and growth-stage groups.
Soil moisture criteria
- Feel and appearance method: farmer's judgement of soil moisture; simple but subjective.
- Depletion of available soil moisture (ASM): irrigate when a fixed share is used, commonly about 50 per cent ASM for many crops (FAO-56 uses p = 0.50 as a common value) and lower depletion for sensitive crops such as vegetables.
- Soil water tension measured with tensiometers or resistance blocks: irrigate at a set tension suited to the crop.
- Gravimetric or neutron probe and TDR measurements give precise but costly readings.
Climatological criteria
- IW/CPE ratio: a fixed depth of irrigation water (IW, for example 4 to 6 cm) applied when cumulative pan evaporation (CPE) reaches the value giving the chosen ratio; wheat trials in India have compared ratios such as 0.8, 1.0 and 1.2.
- Crop evapotranspiration: ETc = Kc × ET0, with ET0 from Penman-Monteith or pan evaporation; irrigate when the soil water balance shows the allowable depletion is used.
Plant based criteria
- Visual symptoms such as wilting, leaf rolling (rice, maize) or darkening of foliage; reliable only after stress has begun.
- Leaf water potential, relative water content, stomatal resistance and canopy temperature or crop water stress index measured with an infrared thermometer.
- Indicator plants grown in the field that wilt earlier than the crop.
Critical growth stage approach
- Where water is limited, irrigate at moisture-sensitive stages: crown root initiation in wheat, tasselling and silking in maize, panicle initiation and flowering in rice, pegging and pod development in groundnut, flowering and pod filling in pulses.
Conclusion
Soil moisture and IW/CPE methods give the most efficient schedules, while the critical stage approach is the practical choice when water is scarce; combining them gives the best water productivity.
Examples and data to cite
- Indian Journal of Agronomy wheat trials schedule irrigation by IW/CPE, for example 4 cm at IW/CPE 0.8, 5 cm at 1.0 and 6 cm at 1.2.
- FAO Irrigation and Drainage Paper 56 (1998) standardised the Penman-Monteith reference evapotranspiration and crop coefficient method.
Facts to remember
- Available soil moisture lies between field capacity (about minus 0.33 bar) and permanent wilting point (about minus 15 bar).
- IW/CPE ratio = depth of irrigation water ÷ cumulative pan evaporation since last irrigation.
- ETc = Kc × ET0.
- Crown root initiation is the most critical stage for irrigating wheat.