On the basis of Boron content, classify irrigation water suitability for various soils and crops.
10 marks · directive: Classify
The core of a good answer
Boron is essential in traces but toxic above narrow limits, so irrigation water is graded into five classes (excellent, good, permissible or fair, doubtful or poor, unsuitable) with separate limits for boron-sensitive, semi-tolerant and tolerant crops; heavier, well managed soils and tolerant crops can use waters that sensitive crops on light soils cannot.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
The question asks for the standard boron-based classification of irrigation water, its interpretation for crop groups, and the soil factors that change the safe limit. Give the table, crop examples and management points.
Answer outline
Introduction
Boron in irrigation water is needed by crops in small amounts; the gap between deficiency and toxicity is small, so water quality is judged by boron concentration against crop tolerance.
Classification of irrigation water by boron (ppm), sensitive / semi-tolerant / tolerant crops (Texas A&M table, adapted from Rowe and Abdel-Magid, 1995)
- Class 1 Excellent: below 0.33 / below 0.67 / below 1.00
- Class 2 Good: 0.33 to 0.67 / 0.67 to 1.33 / 1.00 to 2.00
- Class 3 Permissible: 0.67 to 1.00 / 1.33 to 2.00 / 2.00 to 3.00
- Class 4 Doubtful: 1.00 to 1.25 / 2.00 to 2.50 / 3.00 to 3.75
- Class 5 Unsuitable: above 1.25 / above 2.50 / above 3.75
Simplified interpretation
- Below 0.5 mg/L: satisfactory for all crops.
- 0.5 to 1.0 mg/L: satisfactory for most crops; sensitive crops may show leaf injury.
- 1.0 to 2.0 mg/L: satisfactory for semi-tolerant crops; sensitive crops lose yield.
- 2.0 to 10.0 mg/L: only tolerant crops give satisfactory yields.
Crop groups
- Sensitive: citrus (lemon, orange, grapefruit), peach, plum, grape, walnut, beans.
- Semi-tolerant: wheat, barley, maize, oats, sunflower, potato, field pea, radish.
- Tolerant: sugar beet, alfalfa, asparagus, date palm, cabbage, turnip; cotton is semi-tolerant in older lists and very tolerant in FAO's list.
Soil considerations
- With good irrigation management, boron in the upper root zone approaches roughly the concentration of the irrigation water applied.
- Light, well-drained soils can be leached, but boron moves slowly with soil water and needs about three times as much leaching water as an equivalent reduction in chloride or salinity.
- FAO notes that tolerances vary with climate, soil conditions and crop variety, so table limits are guides rather than fixed thresholds.
Conclusion
Select water class by matching boron concentration to crop tolerance and soil drainage: use doubtful waters only for tolerant crops on permeable soils with adequate leaching.
Examples and data to cite
- FAO Irrigation and Drainage Paper 29 Rev. 1 (Ayers and Westcot, 1985) lists threshold boron tolerance of crops, from lemon (below 0.5 mg/L) to cotton and asparagus (6 to 15 mg/L).
- Oklahoma State University extension guidance uses five classes (excellent, good, fair, poor, unsuitable) with rounded limits (for example, sensitive crops: excellent below 0.3 ppm, unsuitable above 1.3 ppm).
Facts to remember
- 1 ppm = 1 mg/L for dilute water.
- Toxicity symptoms appear first on older leaves as yellowing, spotting or drying of leaf tissue.
- Boron leaching needs about three times more water than chloride leaching.
- Other water quality criteria used alongside boron: EC (salinity), SAR (sodicity), RSC.