The surface tension of liquid A is greater than that of liquid B. Which liquid will show larger (i) vapour pressure, (ii) cohesive force, (iii) boiling point, (iv) capillary action and (v) wetting property? Explain.
5 marks · directive: Explain
The core of a good answer
Liquid A, with the higher surface tension, has stronger cohesive forces, so it shows the larger cohesive force, higher boiling point and larger capillary rise, while liquid B shows the larger vapour pressure and the better wetting (spreading) property.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
Five quick comparisons, each needing one line of reasoning. The key link is that surface tension is a measure of the strength of intermolecular (cohesive) forces; every property then follows from that, with capillary action and wetting needing their equations.
Answer outline
Introduction
Surface tension γ is the work needed to create unit area of new surface; it is high when molecules attract each other strongly, because a surface molecule loses some of these attractions.
(i) Vapour pressure: B
- Weaker cohesion in B lets more molecules escape into the vapour at a given temperature, so B has the larger vapour pressure.
(ii) Cohesive force: A
- Higher γ directly reflects stronger cohesive forces between molecules of A.
(iii) Boiling point: A
- A needs a higher temperature for its (lower) vapour pressure to reach the external pressure, so A boils at a higher temperature; its enthalpy of vaporisation is also larger.
(iv) Capillary action: A
- Capillary rise h = 2γ cos θ/(ρ g r).
- For comparable density and contact angle in the same tube, a larger γ gives a larger rise, so A shows the greater capillary action (the comparison assumes both liquids wet the tube, θ < 90°).
(v) Wetting: B
- Wetting is favoured when adhesion to the solid exceeds cohesion; spreading coefficient S = γ(solid-vapour) − γ(solid-liquid) − γ(liquid-vapour).
- A lower liquid surface tension makes S larger, so B spreads and wets surfaces more readily; this is why surfactants that lower γ improve wetting.
Conclusion
Summary: A has larger cohesive force, boiling point and capillary rise; B has larger vapour pressure and wetting ability. The comparison holds at the same temperature.
Examples and data to cite
- Water (γ about 72.8 mN m⁻¹ at 20 °C) has a much lower vapour pressure and higher boiling point than ethanol (γ about 22.27 mN m⁻¹ at 20 °C), and ethanol wets glass and grease more readily.
- Detergents lower the surface tension of water and so improve wetting of fabrics.
Facts to remember
- Surface tension γ: energy per unit area or force per unit length (N m⁻¹)
- Capillary rise: h = 2γ cos θ/(ρ g r)
- Spreading coefficient S = γ_SV − γ_SL − γ_LV; complete wetting (spreading) when S > 0
- Surface tension decreases with temperature and becomes zero at the critical temperature