(i) Two immiscible liquids A and B have surface tension values γ_A and γ_B, respectively. When both the liquids are taken in a container, then what would be the interfacial tension between the two liquid phases? (Given : γ_A > γ_B)
(ii) Calculate the pressure differential across the surface of ethanol spherical droplet of radius 220 nm at 20 °C. The surface tension of ethanol at that temperature is 22.39 mN m⁻¹.
15 marks · directive: Calculate
The core of a good answer
(i) In general γ_AB = γ_A + γ_B − W_AB (Dupré); when the lower tension liquid B spreads over A and the two liquids are mutually saturated, the spreading coefficient γ_A − γ_B − γ_AB falls to zero, so the interfacial tension is approximately the difference of the surface tensions, γ_AB ≈ γ_A − γ_B; (ii) by the Young and Laplace equation ΔP = 2γ/r = 2 × 0.02239/2.20 × 10⁻⁷ = 2.04 × 10⁵ Pa, about 2 bar.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
Part (i) (5 marks) expects the relation between interfacial tension and the two surface tensions, with the reasoning from work of adhesion; part (ii) (10 marks) is a direct application of the Young and Laplace equation with unit conversion.
Answer outline
Introduction
Interfacial tension is the free energy per unit area of the boundary between two condensed phases; the pressure inside a curved surface exceeds the pressure outside by an amount fixed by curvature and surface tension.
Step 1: (i) Dupré relation
- Work of adhesion to separate unit area of the A/B interface into two free surfaces: W_AB = γ_A + γ_B − γ_AB
- Hence γ_AB = γ_A + γ_B − W_AB
Step 2: (i) Spreading condition
- Spreading coefficient of B on A: S = γ_A − γ_B − γ_AB; B spreads completely over A when S > 0.
- For mutually saturated liquids the interfacial tension is taken as γ_AB ≈ γ_A − γ_B; with γ_A > γ_B this is positive. The relation is approximate.
- Limits from the Dupré relation: γ_AB = 0 would mean W_AB = γ_A + γ_B (no interface, complete miscibility), and γ_AB = γ_A + γ_B would mean W_AB = 0 (no adhesion).
Step 3: (ii) Young and Laplace equation
- For a sphere ΔP = P(inside) − P(outside) = 2γ/r
- Derivation: enlarging the drop by dr needs work ΔP·4πr²dr = γ·8πr dr, giving ΔP = 2γ/r
Step 4: (ii) Numbers
- γ = 22.39 mN m⁻¹ = 2.239 × 10⁻² N m⁻¹; r = 220 nm = 2.20 × 10⁻⁷ m
- ΔP = 2 × 2.239 × 10⁻²/2.20 × 10⁻⁷
- ΔP = 2.035 × 10⁵ Pa ≈ 2.04 × 10⁵ Pa = 2.04 bar ≈ 2.01 atm
Conclusion
The inside of a 220 nm ethanol droplet is about 2 bar above the surrounding pressure; because ΔP ∝ 1/r, small droplets have high internal pressure and, by the Kelvin equation, higher vapour pressure, which is why tiny droplets evaporate faster.
Examples and data to cite
- The Kelvin equation, ln(p/p₀) = 2γV_m/(rRT), built on the Young and Laplace pressure, explains why vapour must be considerably supersaturated before droplets nucleate unless particles such as dust act as nucleation centres.
Facts to remember
- Young and Laplace: ΔP = 2γ/r for a sphere; 4γ/r for a soap bubble with two surfaces
- Dupré: W_AB = γ_A + γ_B − γ_AB
- Spreading coefficient S = γ_A − γ_B − γ_AB; for mutually saturated liquids γ_AB ≈ γ_A − γ_B
- 1 mN m⁻¹ = 10⁻³ N m⁻¹; 1 bar = 10⁵ Pa