(i) At 25 °C, the latent heat of sublimation per mole of iodine is 62.3 kJ mol⁻¹ and the standard enthalpy of formation of HI(g) is 24.7 kJ mol⁻¹. Calculate the enthalpy change which occurs when HI(g) is formed from the gaseous elements at 225 °C. The mean molar heat capacities over the temperature range 25 °C to 225 °C are:
H₂(g); C_p,m = 29.08 J K⁻¹ mol⁻¹
I₂(g); C_p,m = 33.56 J K⁻¹ mol⁻¹
HI(g); C_p,m = 29.87 J K⁻¹ mol⁻¹
(ii) Calculate ΔG° at 400 K temperature for the following reaction :
½N₂(g) + (3/2)H₂(g) → NH₃(g)
Assume that ΔS° is independent of temperature.
(Given : ΔG°₂₉₈ K = −16.496 kJ mol⁻¹
S°(NH₃) = 192.45 J K⁻¹ mol⁻¹
S°(N₂) = 191.61 J K⁻¹ mol⁻¹
S°(H₂) = 130.68 J K⁻¹ mol⁻¹)
20 marks · directive: Calculate
The core of a good answer
(i) From gaseous elements at 25 °C, ΔH = 24.7 − ½(62.3) = −6.45 kJ mol⁻¹; with ΔC_p = −1.45 J K⁻¹ mol⁻¹, Kirchhoff's law gives ΔH(225 °C) = −6.45 − 0.29 = −6.74 kJ mol⁻¹; (ii) ΔS° = −99.375 J K⁻¹ mol⁻¹, so ΔH° = −46.12 kJ mol⁻¹ and ΔG°(400 K) = ΔH° − 400ΔS° ≈ −6.37 kJ mol⁻¹.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
Two 10 mark numericals. (i) uses Hess's law to convert the formation enthalpy from solid iodine to gaseous iodine, then Kirchhoff's equation with mean heat capacities. (ii) uses ΔG = ΔH − TΔS at 298 K to get ΔH, then recalculates ΔG at 400 K assuming ΔH and ΔS constant.
Answer outline
Introduction
Standard formation of HI refers to I₂ in its standard state, the solid, at 25 °C; ½H₂(g) + ½I₂(s) → HI(g), ΔH = +24.7 kJ mol⁻¹. For (ii), T₁ = 298.15 K and T₂ = 400 K.
Step 1: (i) Formation from gaseous elements at 25 °C
- ½I₂(s) → ½I₂(g): ΔH = ½ × 62.3 = +31.15 kJ
- ½H₂(g) + ½I₂(g) → HI(g): ΔH₂₉₈ = 24.7 − 31.15 = −6.45 kJ mol⁻¹
Step 2: (i) ΔC_p of the gas reaction
- ΔC_p = C_p(HI) − ½C_p(H₂) − ½C_p(I₂)
- ΔC_p = 29.87 − ½(29.08 + 33.56) = 29.87 − 31.32 = −1.45 J K⁻¹ mol⁻¹
Step 3: (i) Kirchhoff's law to 225 °C
- ΔH(T₂) = ΔH(T₁) + ΔC_p(T₂ − T₁); T₂ − T₁ = 200 K
- ΔH(498 K) = −6.45 kJ + (−1.45 × 200) J = −6.45 − 0.29 = −6.74 kJ mol⁻¹
Step 4: (ii) ΔS° of the reaction
- ΔS° = S°(NH₃) − ½S°(N₂) − (3/2)S°(H₂)
- ΔS° = 192.45 − 95.805 − 196.02 = −99.375 J K⁻¹ mol⁻¹
Step 5: (ii) ΔH° from ΔG° at 298 K
- ΔH° = ΔG° + TΔS° = −16496 + 298.15 × (−99.375)
- ΔH° = −16496 − 29629 = −46125 J mol⁻¹ ≈ −46.12 kJ mol⁻¹
Step 6: (ii) ΔG° at 400 K
- ΔG°(400) = ΔH° − 400ΔS° = −46125 + 39750 = −6375 J mol⁻¹
- Equivalent shortcut: ΔG°(400) = ΔG°(298) − ΔS°(400 − 298.15) = −16496 + 99.375 × 101.85 = −6.37 kJ mol⁻¹ (using 298 K gives −6.36 kJ mol⁻¹)
Conclusion
(i) −6.74 kJ mol⁻¹: the reaction from gaseous elements is mildly exothermic, and the small negative ΔC_p makes it slightly more so at 225 °C. (ii) −6.37 kJ mol⁻¹: ammonia formation remains spontaneous at 400 K but less so than at 298 K because ΔS° is negative, which is why the Haber process faces a trade off between rate and equilibrium yield.
Examples and data to cite
- The computed ΔH°f(NH₃) of about −46 kJ mol⁻¹ agrees with the tabulated value of −46.1 kJ mol⁻¹ at 298.15 K, a useful check on the data.
- The Haber process runs at about 450 to 550 °C and 250 to 350 bar with an iron catalyst, accepting a lower equilibrium constant for a practical rate.
Facts to remember
- Hess's law: enthalpy changes add along any path
- Kirchhoff's equation: ΔH(T₂) = ΔH(T₁) + ∫ΔC_p dT = ΔH(T₁) + ΔC_p(T₂ − T₁) for constant ΔC_p
- ΔG = ΔH − TΔS
- ΔS°(reaction) = ΣνS°(products) − ΣνS°(reactants)
- (∂ΔG/∂T)_P = −ΔS