Draw and discuss the polarographic wave obtained in the case of a dropping mercury electrode in polarography.
10 marks · directive: Draw and discuss
The core of a good answer
A polarogram is an S shaped current versus applied potential curve: a small residual current, a steep rise when the analyte begins to be reduced at the dropping mercury electrode, and a plateau (limiting current) set by diffusion; the wave height (diffusion current) is proportional to concentration (Ilkovic equation) and the half-wave potential E½ identifies the species.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
A labelled sketch (described here in words) with the three regions, then discussion of residual, migration, diffusion and limiting currents, half-wave potential, the Ilkovic and Heyrovsky equations, the sawtooth oscillations from drop growth, and the experimental conditions (supporting electrolyte, deoxygenation, maximum suppressor).
Answer outline
Introduction
Polarography, invented by Jaroslav Heyrovský in 1922 (Nobel Prize 1959), records the current through a cell with a dropping mercury electrode (DME) as the working electrode and a large non-polarisable reference (mercury pool or SCE) while the applied potential is scanned to more negative values.
The sketch (in words)
- x axis: applied potential of the DME, becoming more negative to the right; y axis: current.
- Region 1: a nearly flat, slowly rising residual current before reduction starts.
- Region 2: a steep sigmoid rise once the decomposition potential of the analyte is reached.
- Region 3: a plateau, the limiting current; the vertical distance between the residual line and the plateau is the diffusion current i_d (wave height).
- The potential at which i = i_d/2 is the half-wave potential E½.
- Superimposed sawtooth oscillations: the current rises as each drop grows and falls when it detaches.
Currents in the wave
- Residual current: charging (capacitive) current of the growing drop's double layer plus traces of impurities.
- Migration current: electrostatic attraction of ions to the electrode; removed by adding excess supporting electrolyte, which eliminates transport of the analyte by migration and raises the conductivity.
- Diffusion current: in the plateau region the analyte is reduced as fast as it arrives, so its surface concentration is zero and current is limited by diffusion.
Ilkovic equation (quantitative)
- i_d = 708 n D^(1/2) m^(2/3) t^(1/6) C for the maximum current (607 for the average current), with i_d in μA, D in cm² s⁻¹, m in mg s⁻¹, t (drop time) in s and C in mmol dm⁻³.
- At fixed capillary characteristics i_d ∝ C, the basis of quantitative analysis.
Heyrovsky and Ilkovic equation (qualitative)
- For a reversible reduction at 25 °C: E = E½ + (0.0592/n) log[(i_d − i)/i]
- A plot of E against log[(i_d − i)/i] is a straight line of slope 0.0592/n, testing reversibility and giving n.
- E½ is independent of concentration and characteristic of the species in a given supporting electrolyte; it is close to the formal potential of the couple.
Practical points
- Excess supporting electrolyte suppresses migration and practically removes the IR drop in the solution.
- Differential pulse polarography measures the current just before the start and the end of short potential pulses, subtracting most of the capacitive current and improving the detection limit 100 to 1000 fold.
Why mercury drops
- Each drop grows reproducibly and presents a smooth surface free from adsorbed analyte or impurity; the high hydrogen overpotential on mercury (−1.04 V at 1 mA cm⁻²) gives a wide window, about +0.2 V to −1.8 V against the reversible hydrogen electrode, for reductions at quite negative potentials.
Conclusion
The polarographic wave thus combines qualitative (E½) and quantitative (i_d) information in one curve; modern variants such as differential pulse polarography improve sensitivity by suppressing the charging current.
Examples and data to cite
- Heyrovský invented polarography in 1922 and received the Nobel Prize in Chemistry in 1959 for it.
- The Ilkovic equation is named after the Slovak chemist Dionýz Ilkovič (1907 to 1980).
Facts to remember
- Ilkovic equation: i_d = 708 n D^(1/2) m^(2/3) t^(1/6) C (maximum current; 607 for average)
- E = E½ + (0.0592/n) log[(i_d − i)/i] at 25 °C for reversible reduction
- Supporting electrolyte suppresses migration current
- E½ independent of concentration