How are nylon 6 and nylon 6,6 prepared ?
5 marks · directive: Explain
The core of a good answer
Nylon 6 is made by ring-opening polymerisation of caprolactam (heated at about 533 K, roughly 260 °C, under nitrogen for 4 to 5 hours), giving −[NH−(CH₂)₅−CO]ₙ−; nylon 6,6 is made by condensation of hexamethylenediamine with adipic acid: the two first form an ammonium carboxylate salt ('nylon salt'), which is heated with removal of water to give −[NH−(CH₂)₆−NH−CO−(CH₂)₄−CO]ₙ−.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
A short preparation answer: monomers, reaction type, conditions, equations and repeat units, with the naming convention (numbers count carbon atoms in the monomers).
Answer outline
Introduction
Both are aliphatic polyamides. The number in the name gives the carbon atoms in the monomer(s): one number for a single AB-type monomer, two numbers (diamine first) for an AA-BB pair.
Nylon 6
- Monomer: caprolactam, (CH₂)₅C(O)NH (C₆H₁₁NO), a seven-membered cyclic amide made industrially from cyclohexanone oxime by acid-induced Beckmann rearrangement.
- The lactam ring opens and the units join head to tail into a chain.
- Equation: n (CH₂)₅C(=O)NH (ring) → −[NH−(CH₂)₅−CO]ₙ−.
- Conditions: about 533 K (about 260 °C) in an inert nitrogen atmosphere for about 4 to 5 hours; no small molecule is lost overall (ring opening).
Nylon 6,6
- Monomers: hexane-1,6-diamine (hexamethylenediamine) H₂N(CH₂)₆NH₂ and hexanedioic (adipic) acid HOOC(CH₂)₄COOH, each with six carbons.
- The diamine and diacid first form an ammonium carboxylate salt (nylon salt), which fixes the 1:1 ratio needed for long chains.
- The salt is heated, in batches or continuously; removing water drives the polycondensation forward.
- Equation: n H₂N(CH₂)₆NH₂ + n HOOC(CH₂)₄COOH → −[NH(CH₂)₆NHCO(CH₂)₄CO]ₙ− + (2n−1) H₂O.
Properties and uses
- Both are polyamides with amide links between chains of CH₂ groups.
- Nylon 6,6 melts at about 264 °C; nylon 6 at about 215 to 218 °C.
- Nylon 6,6 repeat unit formula (C₁₂H₂₂N₂O₂)ₙ; nylon 6 (C₆H₁₁NO)ₙ.
Conclusion
Nylon 6 comes from one monomer by ring opening; nylon 6,6 from two monomers by condensation with loss of water.
Examples and data to cite
- Nylon 6,6: W. H. Carothers' US patent 'Linear polyamides and their production', assigned to E. I. du Pont de Nemours, was issued in 1938.
- Nylon 6 (Perlon) was developed by Paul Schlack at IG Farben and first synthesised in 1938.
- Almost all caprolactam produced goes into the manufacture of nylon 6.
Facts to remember
- Nylon 6 repeat unit: −NH(CH₂)₅CO−, from caprolactam by ring opening.
- Nylon 6,6 repeat unit: −NH(CH₂)₆NHCO(CH₂)₄CO−, from hexamethylenediamine and adipic acid.
- Caprolactam is made by Beckmann rearrangement of cyclohexanone oxime.
- Melting points: nylon 6,6 about 264 °C; nylon 6 about 215 to 218 °C.