Three bodies of weights 200 N, 800 N and 400 N are connected with inextensible strings, passing over the frictionless pulleys as shown in the figure. Using virtual work method, determine the force F required to make the motion impending to the left. Take coefficient of friction for all the contacting surfaces as 0·30 except for the pulleys which are frictionless :
[Figure, described in words: the 200 N block rests on a horizontal upper surface and the force F pulls it horizontally to the left. A horizontal string from its right side passes over Pulley 1 at the top edge of a slope inclined at 45° to the horizontal, and runs down parallel to the slope to the 800 N block resting on the slope. A string from the lower side of the 800 N block runs down the slope to Pulley 2 at the foot of the slope and then horizontally to the right to the 400 N block resting on the lower horizontal surface.]
10 marks · directive: Determine
The core of a good answer
F = 60 + 565.7 + 169.7 + 120 ≈ 915.4 N: in a virtual displacement δ to the left, F must do work equal to friction on all three blocks plus the work done raising the 800 N block up the 45° slope.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
The method of virtual work replaces force equilibrium of each block with one energy equation. Because the strings are inextensible, all three blocks move the same distance δ along their surfaces. Normal reactions and string tensions (internal forces) do no net work; only F, gravity on the inclined block and the friction forces (which oppose impending motion) enter the equation.
Answer outline
Introduction
Motion impending to the left: the 200 N block moves left by δ, the 800 N block moves up the slope by δ, the 400 N block moves left (towards Pulley 2) by δ. μ = 0.30 at all contact surfaces.
Step 1: Normal reactions and friction forces
- 200 N block: N = 200 N, friction = 0.3 × 200 = 60 N (opposes, acts to the right)
- 800 N block: N = 800 cos45° = 565.69 N, friction = 0.3 × 565.69 = 169.71 N (acts down the slope)
- 400 N block: N = 400 N, friction = 0.3 × 400 = 120 N (acts to the right)
Step 2: Virtual displacements
- All blocks move δ along their surfaces (inextensible strings, frictionless pulleys).
- The 800 N block rises vertically by δ sin45°.
Step 3: Virtual work equation
- δW = F δ − 60δ − 800 sin45° δ − 169.71δ − 120δ = 0
- 800 sin45° = 565.69 N
Step 4: Solve
- F = 60 + 565.69 + 169.71 + 120 = 915.39 N
Conclusion
F ≈ 915.4 N. Check by free body diagrams: T₂ (string to the 400 N block) = 120 N; T₁ = 120 + 565.69 + 169.71 = 855.4 N; F = 855.4 + 60 = 915.4 N, the same result.
Examples and data to cite
- The unit dummy force method for structural deflections is a specialisation of the principle of virtual forces, a companion of the virtual displacement principle used here.
- Free body check: string to the 400 N block T₂ = 0.3 × 400 = 120 N; string over Pulley 1 T₁ = 120 + 565.69 + 169.71 = 855.40 N; F = 855.40 + 0.3 × 200 = 915.39 N.
Facts to remember
- Principle of virtual work: in static equilibrium the virtual work of the applied forces is zero for all virtual movements of the system.
- Limiting friction μN is the maximum static friction, reached when motion is impending; friction opposes the potential movement.
- Weight W on an incline of angle θ resolves into W cos θ normal to the surface and W sin θ along it (at 45° both are 0.7071W).
- The virtual work of the forces of reaction is zero for any virtual displacement, so normal reactions and string tensions inside the system drop out.