Assuming the law for the velocity distribution in the boundary layer as v/V = 2(y/δ) − (y/δ)², derive an expression for the thickness of boundary layer. Hence calculate the thickness of boundary layer at a point 2.5 m from the leading edge of a plate, if the size of the plate is 3.0 m long and 1.25 m wide, and it is immersed in the water moving at a velocity of 0.3 m/s. Take viscosity of water equal to 0.001 N-s/m². [Notations used in the above expression have their usual meanings]
15 marks · directive: Derive
The core of a good answer
Using von Kármán's momentum integral, the parabolic profile gives δ = 5.48 x/√Re_x; at x = 2.5 m, Re_x = 7.5 × 10⁵ and δ = 0.0158 m, about 15.8 mm.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
The derivation uses the momentum integral equation for a flat plate with zero pressure gradient, τ0 = ρV² dθ/dx. The given profile fixes both the momentum thickness θ and the wall shear stress τ0 in terms of δ, giving a differential equation in δ which is integrated from the leading edge. The numerical part substitutes the given data (taking ρ = 1000 kg/m³).
Answer outline
Introduction
Profile: u/V = 2η − η² with η = y/δ (written v/V in the question). Data: x = 2.5 m, V = 0.3 m/s, μ = 0.001 N s/m², ρ = 1000 kg/m³. The plate width (1.25 m) and length (3 m) are not needed for δ.
Step 1: Momentum thickness
- θ = δ ∫₀¹ (u/V)(1 − u/V) dη = δ ∫₀¹ (2η − η²)(1 − 2η + η²) dη
- Expanding: (2η − η²)(1 − η)² = 2η − 5η² + 4η³ − η⁴
- ∫₀¹ = 1 − 5/3 + 1 − 1/5 = 2/15, so θ = 2δ/15
- (Displacement thickness δ* = δ ∫₀¹(1 − 2η + η²)dη = δ/3)
Step 2: Wall shear stress
- τ0 = μ (∂u/∂y) at y = 0 = μ V (2/δ − 2y/δ²) at y = 0 = 2μV/δ
Step 3: Momentum integral equation
- τ0 = ρV² dθ/dx gives 2μV/δ = ρV² (2/15) dδ/dx
- δ dδ = 15μ/(ρV) dx
- Integrating with δ = 0 at x = 0: δ²/2 = 15μx/(ρV), δ² = 30μx/(ρV)
- δ = √30 √(μx/(ρV)) = 5.477 x/√Re_x, where Re_x = ρVx/μ
Step 4: Numerical value at x = 2.5 m
- Re_x = 1000 × 0.3 × 2.5/0.001 = 7.5 × 10⁵
- √Re_x = 866.0
- δ = 5.477 × 2.5/866.0 = 0.01581 m ≈ 15.8 mm
Conclusion
δ = 5.48 x/√Re_x and δ(2.5 m) ≈ 15.8 mm. Check: δ² = 30νx/V = 30 × 10⁻⁶ × 2.5/0.3 = 2.5 × 10⁻⁴ m², so δ = 0.0158 m.
Examples and data to cite
- The momentum integral used here is known as the von Kármán momentum integral.
- Blasius (1908) obtained the exact similarity solution for the laminar flat plate boundary layer.
Facts to remember
- Momentum integral equation (zero pressure gradient): τ0 = ρV² dθ/dx.
- For u/V = 2η − η²: δ*/δ = 1/3, θ/δ = 2/15, τ0 = 2μV/δ.
- Result: δ/x = 5.48/√Re_x; local skin friction coefficient c_f = 0.730/√Re_x for this profile.