A retaining wall 5 m high with a smooth vertical back is pushed against a soil mass. What is the total passive pressure, if the horizontal soil surface carries a uniform load of 60 kN/m²? Also, determine the location of resultant thrust, where it is acting. The properties of the soil are as follows :
Effective cohesion = 35 kPa
Effective angle of shearing resistance = 20°
Bulk density = 19.5 kN/m³
10 marks · directive: Determine
The core of a good answer
With Kp = tan²(55°) = 2.04, passive pressure rises from 222.3 kPa at the top to 421.2 kPa at the base; total passive thrust is about 1609 kN per metre run, acting about 2.24 m above the base of the wall.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
The question applies Rankine's passive earth pressure theory extended to c-φ soils (Bell's equation) with a uniform surcharge. A smooth vertical back and horizontal backfill justify the Rankine assumptions. The answer needs the pressure diagram, the total thrust and the height of its line of action.
Answer outline
Introduction
Given: H = 5 m, c' = 35 kPa, φ' = 20°, γ = 19.5 kN/m³, surcharge q = 60 kPa. Smooth vertical back, horizontal surface; values per metre length of wall.
Step 1: Passive coefficient
- Kp = tan²(45° + φ/2) = tan²(55°) = 2.0396
- √Kp = 1.4281
Step 2: Pressure at the top (z = 0)
- σp = Kp q + 2c√Kp
- Kp q = 2.0396 × 60 = 122.38 kPa
- 2c√Kp = 2 × 35 × 1.4281 = 99.97 kPa
- σp(top) = 222.35 kPa
Step 3: Pressure at the base (z = 5 m)
- Kp γ H = 2.0396 × 19.5 × 5 = 198.86 kPa
- σp(base) = 222.35 + 198.86 = 421.21 kPa
Step 4: Total passive thrust
- Rectangular part P1 = (Kp q + 2c√Kp) H = 222.35 × 5 = 1111.7 kN/m, acting at H/2 = 2.5 m
- Triangular part P2 = ½ Kp γ H² = 0.5 × 2.0396 × 19.5 × 25 = 497.2 kN/m, acting at H/3 = 1.667 m
- Pp = P1 + P2 = 1608.9 kN/m
Step 5: Location of resultant
- ȳ = (P1 × 2.5 + P2 × 1.667)/Pp = (2779.3 + 828.6)/1608.9 = 2.24 m above the base
Conclusion
Total passive resistance about 1609 kN/m acting 2.24 m above the base (2.76 m below the top). Check: the trapezoidal diagram (222.35 to 421.21 kPa) has area 0.5 × (222.35 + 421.21) × 5 = 1608.9 kN/m.
Examples and data to cite
- Bell (1915) extended Rankine's theory to cohesive soils by adding the 2c√K term.
Facts to remember
- Rankine passive coefficient Kp = tan²(45° + φ/2) for a smooth vertical wall with horizontal backfill.
- Bell's equation (passive): σp = Kp σv + 2c√Kp; cohesion increases passive resistance throughout the depth, so there is no tension zone.
- A uniform surcharge q adds Kp q uniformly over the full height.
- Active pressure is the minimum and passive resistance the maximum lateral pressure; passive resistance applies when the wall is pushed into the soil.