Pratidin
2026 · Civil Engineering Optional Paper I · 15 marksMainsQuestion 7b

The plan of a foundation is shown in the figure. The uniform load intensity on the soil is 100 kN/m². Determine the vertical stress increment at a depth 4 m below the point O, using Boussinesq's method :
[Figure, described in words: the plan is a rectangle ABCD, 8 m long (AB and DC) and 4 m wide (AD and BC), with a semicircle of radius 2 m attached outward on side BC. O is the mid-point of BC and the centre of the semicircle, 2 m from B and 2 m from C.]

15 marks · directive: Determine

Answer

The core of a good answer

Splitting the plan at O into two 8 m × 2 m rectangles (influence factor 0.1350 each, m = 2, n = 0.5) and a semicircle centred at O (half of the circular influence 0.2845), the vertical stress increment 4 m below O is 100 × (2 × 0.1350 + 0.1422) ≈ 41.2 kPa.

An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work

What the question asks

The question tests superposition with Boussinesq based influence factors: O is a common corner of two rectangles and the centre of the semicircle, so standard corner (Newmark/Fadum) and circular area solutions apply directly.

Answer outline

Introduction

Given: q = 100 kPa, z = 4 m. The rectangle ABCD is divided by a line through O parallel to AB into two rectangles each 8 m × 2 m with a corner at O; the semicircle has radius R = 2 m with centre O.

Step 1: Rectangle corner influence factor

Step 2: Two rectangles

Step 3: Semicircle centred at O

Step 4: Total

Conclusion

Vertical stress increment at 4 m below O is about 41.2 kN/m². A numerical integration of the Boussinesq point load expression over the same plan gives the same value, confirming the superposition.

Examples and data to cite

Facts

Facts to remember

Sources used for the explanation

Write a timed answer in the app