A Francis turbine has a speed of 300 r.p.m. The inlet diameter of the turbine is 1.20 m and its width is 280 mm at the inlet. The vane thickness coefficient can be taken as 0.95. If at the inlet, the guide vane angle is 30° and the blade angle is 90°, determine the power produced by assuming an overall efficiency of 90%. Assume radial discharge at the outlet and take density of water as 1000 kg/m³.
15 marks · directive: Determine
The core of a good answer
With u1 = Vw1 = 18.85 m/s, Vf1 = 10.88 m/s and Q = 10.91 m³/s, the runner work is ρQVw1u1 = 3.88 MW (equivalent head 36.2 m); taking 90% overall efficiency on this, the power produced is about 3.49 MW.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
The question uses inlet velocity triangles of a Francis turbine. A 90° blade angle makes the whirl velocity equal to the blade speed; the guide vane angle then gives the flow velocity, and the discharge follows from the flow area reduced by the vane thickness coefficient. With radial discharge, Euler's equation gives the energy transferred, from which the output is obtained using the stated overall efficiency.
Answer outline
Introduction
Given: N = 300 rpm, D1 = 1.20 m, B1 = 0.28 m, vane thickness coefficient kt = 0.95, α1 = 30° (guide vane), β1 = 90° (blade), η0 = 0.90, radial outlet (Vw2 = 0), ρ = 1000 kg/m³. Since no head or hydraulic efficiency is given, the runner work is taken as the energy supplied (head H = Vw1u1/g) and the overall efficiency is applied to it.
Step 1: Peripheral velocity at inlet
- u1 = πD1N/60 = π × 1.20 × 300/60 = 18.85 m/s
Step 2: Inlet velocity triangle
- Blade angle 90° means relative velocity is radial, so Vw1 = u1 = 18.85 m/s
- tan α1 = Vf1/Vw1, so Vf1 = 18.85 × tan30° = 10.88 m/s
Step 3: Discharge
- Q = kt π D1 B1 Vf1 = 0.95 × π × 1.20 × 0.28 × 10.88 = 10.91 m³/s
Step 4: Work done by water on the runner
- Euler equation with radial discharge (Vw2 = 0): work per unit weight = Vw1u1/g = 18.85 × 18.85/9.81 = 36.22 m
- Power transferred = ρQVw1u1 = 1000 × 10.91 × 18.85 × 18.85 = 3.878 × 10⁶ W
Step 5: Power produced
- P = η0 × ρgQH = 0.90 × 1000 × 9.81 × 10.91 × 36.22 = 3.49 × 10⁶ W ≈ 3.49 MW
Conclusion
Power produced about 3.49 MW (shaft), from a discharge of 10.9 m³/s and a runner work of 3.88 MW. Check: ρgQH = 1000 × 9.81 × 10.91 × 36.22 = 3.88 MW, equal to ρQVw1u1, and 0.90 × 3.88 = 3.49 MW.
Examples and data to cite
- The Francis turbine, designed by James B. Francis in 1848, is an inward flow reaction turbine combining radial and axial flow.
- Francis turbines operate over heads of roughly 40 to 600 m, and large units exceed 90% efficiency.
Facts to remember
- Euler turbine equation: work per unit mass = Vw1u1 ± Vw2u2; with radial discharge Vw2 = 0.
- Flow area at inlet = kt π D1 B1, where kt accounts for the space occupied by vane thickness.
- Blade angle 90° at inlet gives Vw1 = u1 (radial vanes at inlet).
- Overall efficiency η0 = shaft power/(ρgQH).