A vertical curve is formed when a descending gradient of 0·5% meets another descending gradient of 3·0%. Find the length of the vertical curve to provide the required (i) stopping sight distance, and (ii) overtaking sight distance, for a design speed of 65 km/hr. Assume the coefficient of longitudinal friction as 0·35 and the acceleration as 3·6 km/hr/sec. Assume other necessary data suitably.
15 marks · directive: Find
The core of a good answer
The curve is a summit (convex) curve with deviation angle N = 0.025; with SSD = 92.6 m the IRC formula gives L = 2S − 4.4/N ≈ 9.2 m (so the IRC minimum length for the speed governs in practice), and with OSD ≈ 312.8 m it gives L = 2S − 9.6/N ≈ 241.6 m.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
Method: identify the type of vertical curve from the change of grade, compute SSD and OSD from IRC assumptions, then use the IRC summit curve length formulas, first assuming L > S and switching to the L < S formula when that assumption fails.
Answer outline
Introduction
Grades n1 = −0.5 per cent and n2 = −3.0 per cent. Because the road goes from a flatter to a steeper downgrade, the curve is convex (summit). Design speed V = 65 km/h, f = 0.35, acceleration A = 3.6 km/h per second = 1 m/s². Assumed data (IRC practice): reaction time 2.5 s for SSD; driver eye height H = 1.2 m and object height h = 0.15 m for SSD, both 1.2 m for OSD; overtaken vehicle speed Vb = V − 16 km/h; reaction time 2 s in OSD; two-way road; grade effect on braking neglected as in IRC sight distance tables.
Step 1: Deviation angle
- N = |n1 − n2| = |−0.005 − (−0.030)| = 0.025
Step 2: Stopping sight distance
- v = 65/3.6 = 18.056 m/s
- Lag distance = v t = 18.056 × 2.5 = 45.14 m
- Braking distance = v²/(2 g f) = 18.056²/(2 × 9.81 × 0.35) = 47.47 m
- SSD = 45.14 + 47.47 = 92.61 m, say 92.6 m
Step 3: Summit curve length for SSD
- Assume L > S: L = N S²/[2(√H + √h)²] = N S²/4.4 = 0.025 × 92.61²/4.4 = 48.7 m
- 48.7 m < 92.6 m, so the assumption fails.
- Use L < S: L = 2S − 4.4/N = 2 × 92.61 − 4.4/0.025 = 185.23 − 176.0 = 9.2 m
Step 4: Overtaking sight distance
- Vb = 65 − 16 = 49 km/h
- d1 = 0.28 Vb t = 0.28 × 49 × 2 = 27.44 m
- Spacing s = 0.2 Vb + 6 = 0.2 × 49 + 6 = 15.8 m
- Overtaking time T = √(4 × 3.6 s/A) = √(14.4 × 15.8/3.6) = √63.2 = 7.95 s
- d2 = 0.28 Vb T + 2s = 0.28 × 49 × 7.95 + 2 × 15.8 = 109.07 + 31.6 = 140.67 m
- d3 = 0.28 V T = 0.28 × 65 × 7.95 = 144.69 m
- OSD = d1 + d2 + d3 = 27.44 + 140.67 + 144.69 = 312.80 m
Step 5: Summit curve length for OSD
- Assume L > S: L = N S²/(8H) = N S²/9.6 = 0.025 × 312.80²/9.6 = 254.8 m
- 254.8 m < 312.8 m, so the assumption fails.
- Use L < S: L = 2S − 9.6/N = 2 × 312.80 − 9.6/0.025 = 625.60 − 384.0 = 241.6 m
Conclusion
Length for SSD ≈ 9.2 m by formula (adopt at least the minimum vertical curve length recommended in IRC:SP:23 for 65 km/h); length for OSD ≈ 241.6 m. Check: in both cases the computed L is less than S, consistent with the formula used. If the braking distance is corrected for the steeper 3 per cent downgrade, SSD becomes about 97.1 m; the method is unchanged.
Examples and data to cite
- IRC values used for summit curves: eye height 1.2 m, object height 0.15 m for SSD and 1.2 m for OSD, which give the constants 4.4 and 9.6.
- IRC:SP:23-1993 'Vertical curves for highways' and IRC:66-1976 'Recommended practice for sight distance on rural highways' give the Indian values used here (2.5 s reaction time, overtaken vehicle 16 km/h slower than design speed).
Facts to remember
- Summit curve, L > S: L = N S²/[√(2H) + √(2h)]²; L < S: L = 2S − [√(2H) + √(2h)]²/N.
- SSD = v t + v²/(2 g f), t = 2.5 s (IRC).
- OSD = d1 + d2 + d3 with d1 = 0.28 Vb t, d2 = 0.28 Vb T + 2s, d3 = 0.28 V T, s = 0.2 Vb + 6, T = √(4 × 3.6 s/A), speeds in km/h, A in km/h per second.
- Overtaken vehicle speed assumed V − 16 km/h when not given.
- Deviation angle N is the algebraic difference of grades; a change from a flatter to a steeper downgrade forms a summit curve.