In running fly levels from a benchmark of RL 381·605, the following readings were obtained :
Backsight 2·215, 1·030, 1·595, 1·655
Foresight 1·025, 3·290, 2·385
From the last position of the instrument, four pegs at 50-metre intervals are to be set out on a uniformly falling gradient of 1 in 100; the first peg is to have an RL of 380·500. Work out the staff readings required for setting the tops of the pegs on the given gradient.
15 marks · directive: Work out
The core of a good answer
By the height of instrument method the final height of collimation is 381.400 m; the pegs must have RLs of 380.500, 380.000, 379.500 and 379.000 m, so the staff readings to the peg tops are 0.900 m, 1.400 m, 1.900 m and 2.400 m.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
Method: reduce the fly levels by the height of instrument (collimation) method to find the line of sight at the last set-up, then compute the required RL of each peg from the gradient and subtract it from the height of instrument to get the staff reading.
Answer outline
Introduction
Four backsights and three foresights mean four instrument set-ups with three change points. The fourth backsight sets the last height of instrument, from which the pegs are set. A falling gradient of 1 in 100 lowers each successive peg by 50/100 = 0.5 m.
Step 1: First set-up
- HI1 = RL of BM + BS = 381.605 + 2.215 = 383.820
- RL of change point 1 = 383.820 − 1.025 = 382.795
Step 2: Second set-up
- HI2 = 382.795 + 1.030 = 383.825
- RL of change point 2 = 383.825 − 3.290 = 380.535
Step 3: Third set-up
- HI3 = 380.535 + 1.595 = 382.130
- RL of change point 3 = 382.130 − 2.385 = 379.745
Step 4: Last set-up
- HI4 = 379.745 + 1.655 = 381.400
- Arithmetic check: ΣBS − ΣFS = 6.495 − 6.700 = −0.205; 381.605 − 0.205 = 381.400, which agrees with HI4.
Step 5: Required RLs and staff readings
- Peg 1: RL 380.500; staff reading = 381.400 − 380.500 = 0.900 m
- Peg 2 (50 m): RL 380.500 − 0.5 = 380.000; staff reading = 1.400 m
- Peg 3 (100 m): RL 379.500; staff reading = 1.900 m
- Peg 4 (150 m): RL 379.000; staff reading = 2.400 m
Conclusion
Staff readings 0.900, 1.400, 1.900 and 2.400 m; each is 0.5 m more than the previous one, matching a fall of 0.5 m per 50 m, and the arithmetic check on the level book closes exactly.
Examples and data to cite
- Field practice: each peg is driven until the staff held on its top reads the computed value; this is how grade pegs for sewers, drains and road formation are set.
- The same procedure applies with the rise and fall method; only the booking differs.
Facts to remember
- Height of instrument = RL of point + backsight; RL of point = height of instrument − foresight or intermediate sight.
- Arithmetic check: ΣBS − ΣFS = last RL − first RL.
- A gradient of 1 in 100 means 1 m fall per 100 m horizontal distance.
- Fly levelling is levelling run to carry a level from a benchmark to a site, with only backsights and foresights at change points.