What is the difference between a flood hydrograph and a mass curve ? Using the following data of a river at a dam site, construct and plot a flood hydrograph and find the values of minimum and maximum discharge in the river.
Month | Flow (m³/s)
January | 110
February | 120
March | 130
April | 140
May | 150
June | 160
July | 180
August | 210
September | 170
October | 140
November | 110
December | 100
10 marks · directive: Distinguish
The core of a good answer
A hydrograph plots discharge against time and shows the rate of flow, whereas a mass curve plots cumulative flow volume against time and its slope gives the rate; from the data the maximum discharge is 210 m³/s in August and the minimum is 100 m³/s in December.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
The part has a theory component (contrast two graphical tools of hydrology) and a simple data component: plot the monthly flows as a hydrograph and read off the extremes. A good answer also shows how the same data become a mass curve, so the difference is made concrete.
Answer outline
Introduction
Given: mean monthly flows at a dam site for one year, from 110 m³/s in January to 100 m³/s in December. Plot discharge (ordinate) against month (abscissa) and join the points.
Step 1: Hydrograph versus mass curve
- Hydrograph: ordinate = discharge Q (m³/s), abscissa = time; it shows rising limb, peak (crest) and recession limb, and the area under it is the volume of flow.
- Mass curve: ordinate = cumulative volume ΣQ·Δt, abscissa = time; it always rises (never falls) because volume only accumulates; its slope at any time = rate of flow.
- Use: the hydrograph shows when the peak discharge occurs and how flow recedes; the mass curve is used to fix the live storage needed for a given demand (the maximum ordinate between the mass curve and demand lines drawn at its peak points).
Step 2: Tabulate and plot the hydrograph
- Plot points (Jan, 110), (Feb, 120), (Mar, 130), (Apr, 140), (May, 150), (Jun, 160), (Jul, 180), (Aug, 210), (Sep, 170), (Oct, 140), (Nov, 110), (Dec, 100) and join them by a smooth curve or bar steps.
- Rising limb from January to August; peak in August; recession limb from August to December.
Step 3: Read the extremes
- Maximum discharge = 210 m³/s (August).
- Minimum discharge = 100 m³/s (December).
- Mean of the twelve monthly flows = 1720/12 = 143.3 m³/s.
Step 4: The same data as a mass curve (for contrast)
- Cumulative of monthly mean flows (m³/s month): 110, 230, 360, 500, 650, 810, 990, 1200, 1370, 1510, 1620, 1720.
- In volume terms (Q × days × 86400): January 294.6 Mm³ and total annual flow ≈ 4525.6 Mm³ (non-leap year); the curve is steepest in August, where the hydrograph peaks.
Conclusion
The hydrograph peaks at 210 m³/s in August and falls to 100 m³/s in December; the ratio of maximum to minimum, 2.1, shows a strongly seasonal flow regime. Check: the steepest segment of the mass curve falls in the same month as the hydrograph peak.
Examples and data to cite
- Monthly volume check: August 210 × 31 × 86400 = 562.5 Mm³, the largest monthly volume of the year.
Facts to remember
- Area under a hydrograph between two times = volume of water passing the section in that period.
- Slope of the mass curve at any instant = discharge at that instant.
- Mass curve technique: cumulative inflow is plotted against time, and the maximum ordinate between the demand line and the mass curve gives the live storage needed for that demand.
- 1 m³/s flowing for a 31 day month = 2.6784 Mm³.