A 30 cm diameter well penetrates 25 m below the static water table. After 24 hrs of pumping @ 5400 l/min, the water table in a test well 90 m away is lowered by 0.53 m and in another well 30 m away, the drawdown is 1.11 m. What is the transmissivity of the aquifer ?
10 marks · directive: Calculate
The core of a good answer
Treating the aquifer as unconfined (Dupuit-Thiem), K = Q ln(r₂/r₁)/[π(h₂² − h₁²)] = 1.122 × 10⁻³ m/s and T = K·H = 0.0281 m²/s ≈ 2424 m²/day; the confined Thiem form gives a close check of 0.0271 m²/s ≈ 2344 m²/day.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
The well penetrates the saturated thickness below the water table, so the steady radial flow (Dupuit-Thiem) equation for an unconfined aquifer applies, using the two observation wells; transmissivity is permeability times saturated thickness.
Answer outline
Introduction
Q = 5400 l/min = 0.09 m³/s; saturated thickness H = 25 m; observation wells r₁ = 30 m (s₁ = 1.11 m) and r₂ = 90 m (s₂ = 0.53 m). The well diameter (30 cm) is not needed because the two observation wells give the gradient.
Step 1: Heads at the observation wells (from the impervious base)
- h₁ = 25 − 1.11 = 23.89 m at r₁ = 30 m
- h₂ = 25 − 0.53 = 24.47 m at r₂ = 90 m
Step 2: Unconfined Dupuit-Thiem equation
- Q = πK(h₂² − h₁²)/ln(r₂/r₁)
- h₂² − h₁² = 598.78 − 570.73 = 28.049 m²
- ln(90/30) = ln 3 = 1.0986
Step 3: Permeability
- K = Q ln(r₂/r₁)/[π(h₂² − h₁²)] = 0.09 × 1.0986/(π × 28.049) = 1.122 × 10⁻³ m/s ≈ 96.9 m/day
Step 4: Transmissivity
- T = K·H = 1.122 × 10⁻³ × 25 = 0.0281 m²/s
- T ≈ 0.0281 × 86400 ≈ 2424 m²/day
Step 5: Check with the confined (Thiem) form
- T = Q ln(r₂/r₁)/[2π(s₁ − s₂)] = 0.09 × 1.0986/(2π × 0.58) = 0.0271 m²/s ≈ 2344 m²/day
- The two agree within about 3.4% because the drawdowns are small compared with the 25 m saturated thickness
Conclusion
Transmissivity ≈ 0.028 m²/s (about 2.4 × 10³ m²/day) by the unconfined form, or 0.027 m²/s by the confined form. Check: the 24 h pumping period is taken as long enough for near steady state, the assumption under which the Thiem method is valid.
Examples and data to cite
- A confined aquifer of the same data would be solved directly with T = Q ln(r₂/r₁)/[2π(s₁ − s₂)].
Facts to remember
- Dupuit-Thiem (unconfined): Q = πK(h₂² − h₁²)/ln(r₂/r₁).
- Thiem (confined): Q = 2πT(s₁ − s₂)/ln(r₂/r₁).
- Transmissivity T = K × saturated thickness; units m²/s or m²/day.
- Assumptions: steady state, homogeneous isotropic aquifer, radial horizontal flow (Dupuit), fully penetrating well.