The following information is available regarding the relationship between trap efficiency and capacity-inflow ratio for a reservoir :
Capacity-Inflow Ratio | Trap Efficiency
0.1 | 87
0.2 | 93
0.3 | 95
0.4 | 95.5
0.5 | 96
0.6 | 96.5
0.7 | 97
0.8 | 97.2
0.9 | 97.3
1.0 | 97.5
Find the probable life of the reservoir with an initial reservoir capacity of 30 million cubic metres, if the annual flood flow is 60 million cubic metres and average annual sediment inflow is 360000 tonnes. Assume a specific weight of sediment equal to 1200 kg/m³. The useful life of the reservoir will terminate when 80% of initial capacity is filled with sediment.
20 marks · directive: Calculate
The core of a good answer
Annual sediment inflow is 0.30 Mm³; filling 24 Mm³ (80% of 30 Mm³) in steps of 3 Mm³, with trap efficiency read from the table at the average capacity-inflow ratio of each step, gives a probable life of about 85 years.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
The trap efficiency (Brune type relation) falls as the reservoir silts up, so the life cannot be found by simple division; the capacity lost is split into increments, the average trap efficiency of each increment is found from the C/I ratio, and the years for each increment are summed.
Answer outline
Introduction
Initial capacity C₀ = 30 Mm³; inflow I = 60 Mm³/year; sediment = 360000 t/year at 1.2 t/m³. Life ends when capacity falls to 0.2 × 30 = 6 Mm³. Trap efficiency between tabulated C/I values is found by linear interpolation.
Step 1: Volume of sediment brought in each year
- V_s = 360000 × 1000/1200 = 300000 m³ = 0.30 Mm³ per year
Step 2: Divide the loss of 24 Mm³ into 8 increments of 3 Mm³
- Capacity steps: 30, 27, 24, 21, 18, 15, 12, 9, 6 Mm³
- C/I at these capacities: 0.50, 0.45, 0.40, 0.35, 0.30, 0.25, 0.20, 0.15, 0.10
Step 3: Trap efficiency and years for each increment
- Years = 3/(0.30 × average TE)
- 30 to 27: TE 96.0 and 95.75, average 95.875%, 0.2876 Mm³ trapped per year, 10.43 years
- 27 to 24: 95.75 and 95.5, average 95.625%, 10.46 years
- 24 to 21: 95.5 and 95.25, average 95.375%, 10.48 years
- 21 to 18: 95.25 and 95.0, average 95.125%, 10.51 years
- 18 to 15: 95.0 and 94.0, average 94.5%, 10.58 years
- 15 to 12: 94.0 and 93.0, average 93.5%, 10.70 years
- 12 to 9: 93.0 and 90.0, average 91.5%, 10.93 years
- 9 to 6: 90.0 and 87.0, average 88.5%, 11.30 years
Step 4: Sum
- Life = 10.43 + 10.46 + 10.48 + 10.51 + 10.58 + 10.70 + 10.93 + 11.30 = 85.4 years
Conclusion
Probable useful life ≈ 85 years. Check: a fine numerical integration of dC/(0.30 × TE) from 6 to 30 Mm³ also gives 85.4 years; and with a constant 96% trap efficiency the life would be 24/(0.30 × 0.96) = 83.3 years, slightly less, because trapping falls as the reservoir fills.
Examples and data to cite
- Smaller increments (for example 1 Mm³) change the answer only in the second decimal place.
Facts to remember
- Trap efficiency = total deposited sediment/total sediment inflow, expressed as a percentage; it depends mainly on the capacity-inflow ratio (trap efficiency curves of Brune and of Churchill, see IS 12182:1987).
- Sediment volume = mass/specific weight of deposited sediment.
- Life of a reservoir denotes the period during which the whole or a specified fraction (here 80%) of its capacity is lost.
- Life = Σ ΔC/(annual sediment volume × average trap efficiency).