Draw a neat sketch of a diversion work (headwork). Briefly explain the functions of the following :
(i) Silt excluder
(ii) Cross regulator
(iii) Canal fall
(iv) Aqueduct
(v) Escape
15 marks · directive: Explain
The core of a good answer
A diversion headwork consists of a weir or barrage across the river with undersluices, a divide wall, a fish pass where needed, a canal head regulator, silt excluder and river training works; the silt excluder carries settled silt away from the canal head, a cross regulator heads up water in the main canal, a fall drops the canal bed where the ground is steeper, an aqueduct carries the canal over a drain, and an escape releases surplus water safely.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
The sketch is a plan of the headworks with its components labelled; the five functions are short notes. Marks go to correct layout (head regulator at an angle just upstream of the weir, undersluice pocket in front of it, divide wall separating the pocket) and to precise functions.
Answer outline
Introduction
Diversion headworks raise the river level and divert a regulated, relatively silt-free supply into an off-taking canal; they do not store water (unlike a dam).
Sketch (plan) to draw
- River flowing across the page; weir or barrage (a gated form of weir) across the river.
- Undersluices at the canal end of the weir, with a divide wall separating the pocket in front of the canal head from the turbulent flood flow.
- Canal head regulator on the bank, set at about 90° to 110° to the barrage axis to limit silt entry; silt excluder tunnels at river bed level in the pocket in front of it.
- Fish ladder (fish pass) where migratory fish are present; guide bunds and marginal bunds as river training works.
(i) Silt excluder
- A series of reinforced concrete tunnels at river bed level in front of the head regulator, ending at the undersluice bays (staggered Khanki type or angled Trimmu type).
- The pocket is a low velocity zone in which sediment settles; the heavier sediment is carried downstream through the tunnels and undersluices, so a cleaner supply enters the canal.
(ii) Cross regulator
- Gated structure across the main or parent canal, just downstream of an off-take.
- Heads up water in the parent channel to divert the desired quantity into the off-taking distributary, controls the flow through the parent canal, and maintains the water level upstream.
(iii) Canal fall
- Drop structure in the canal bed where the natural ground slope is steeper than the designed canal bed slope.
- Avoids an enormous amount of filling, dissipates the surplus energy (hydraulic jump basin or pool), and the drop can be used to generate power; types include Sarda type vertical drop, glacis and trapezoidal notch falls; a fall may be combined with a regulator or bridge to save cost.
(iv) Aqueduct
- Cross drainage work in which the canal is carried in a trough or barrel over a natural drain or river.
- When the drain's high flood level is below the trough bottom the drain flows freely beneath; when it rises above and the flow becomes pressurised, the work is a syphon aqueduct.
(v) Escape
- Structure to release excess water from a canal into a natural drain or river.
- Protects the canal from overtopping, bank erosion and breaches in an emergency and allows it to be emptied for repairs; tail escapes maintain full supply level at the tail end; some escapes act as scouring sluices; types are weir (surface) escapes and sluice escapes.
Conclusion
Together the headwork components divert a controlled, low-silt supply, and the regulation and cross-drainage works carry it safely along the canal.
Examples and data to cite
- The Farakka Barrage on the Ganga diverts water through a feeder canal of about 42 km to the Bhagirathi-Hooghly, an Indian example of a diversion work.
Facts to remember
- Diversion dams and barrages raise the water level to divert flow and generally do not impound a reservoir.
- A barrage is a gated form of weir and gives greater control of the pond level than a fixed weir.
- Silt excluders are reinforced concrete tunnels at river bed level in front of the head regulator, ending at the undersluice bays.
- Cross drainage types: aqueduct, syphon aqueduct, super passage, canal syphon, level crossing (design code IS 7784).