A 1250 r.p.m., 220 V, 4·5 kW, DC shunt machine is running as a generator delivering rated load at rated speed and voltage. The machine has rated core loss of 250 W, rated armature copper loss of 200 W and field copper loss of 50 W. Now, the prime mover speed is increased by 20% and simultaneously an external resistance is added in the field circuit so that the developed voltage in armature remains the same and load remains unchanged. Find the—
(i) value of the added resistance;
(ii) loss in external resistance and field;
(iii) input power to the generator;
(iv) armature developed voltage.
Neglect friction and windage losses. Assume constant core loss and linear magnetic circuit.
10 marks · directive: Find
The core of a good answer
R_f = 968 Ω and the field current must fall from 0.2273 A to 0.1894 A (flux ∝ 1/speed), so (i) added resistance ≈ 193.6 Ω; (ii) loss ≈ 6.94 W in the external resistance and 34.72 W in the field winding (41.67 W total); (iii) input ≈ 4991 W; (iv) E ≈ 229.7 V, the same as before.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
A DC generator problem on the EMF equation E = kφN. If speed rises by 20% and E must stay the same, flux, and with a linear magnetic circuit the field current, must fall by the factor 1/1.2. The rest is a loss bookkeeping exercise with constant core loss.
Answer outline
Introduction
Rated: V = 220 V, P = 4500 W, N = 1250 rpm, core loss 250 W, armature copper loss 200 W, field copper loss 50 W. New speed 1.2 × 1250 = 1500 rpm; terminal voltage and load current are taken unchanged.
Step 1: Original operating point
- I_L = 4500/220 = 20.4545 A
- I_f = 50/220 = 0.22727 A; R_f = 220²/50 = 968 Ω
- I_a = I_L + I_f = 20.6818 A
- R_a = 200/20.6818² = 0.46758 Ω
- E = V + I_a R_a = 220 + 9.670 = 229.67 V
Step 2: New field current and added resistance (i)
- E = kφN; E same and N × 1.2, so φ′ = φ/1.2; linear circuit: I_f′ = 0.22727/1.2 = 0.18939 A
- Total field circuit resistance = 220/0.18939 = 1161.6 Ω
- Added resistance R_x = 1161.6 − 968 = 193.6 Ω
Step 3: Field circuit losses (ii)
- Loss in R_x = 0.18939² × 193.6 = 6.94 W
- Loss in field winding = 0.18939² × 968 = 34.72 W
- Total field circuit loss = 220 × 0.18939 = 41.67 W (down from 50 W)
Step 4: Input power (iii)
- I_a′ = 20.4545 + 0.18939 = 20.6439 A
- Armature copper loss = 20.6439² × 0.46758 = 199.27 W
- Input = output + armature Cu loss + field circuit loss + core loss = 4500 + 199.27 + 41.67 + 250 = 4990.9 W ≈ 4.99 kW
- Check: E I_a′ + core loss = 229.65 × 20.6439 + 250 = 4990.9 W
Step 5: Developed voltage (iv)
- E′ = V + I_a′R_a = 220 + 20.6439 × 0.46758 = 229.65 V ≈ 229.7 V
- It equals the original 229.67 V within 0.02 V, as the condition requires (the tiny difference comes from I_a falling by 0.038 A).
- Exact check holding E = 229.67 V and the load resistance 10.756 Ω gives V = 220.02 V, so taking V = 220 V is justified.
Conclusion
Added resistance ≈ 193.6 Ω; field circuit loss 41.67 W (6.94 W external, 34.72 W winding); input ≈ 4.99 kW; developed EMF ≈ 229.7 V. Efficiency improves slightly, from 4500/5000 = 90.0% to 4500/4990.9 = 90.2%.
Examples and data to cite
- A resistance (field regulator) in the shunt field circuit sets the field current and so the flux; here it is used to hold the EMF constant while the speed rises.
- In the original state input = 4500 + 200 + 50 + 250 = 5000 W, so efficiency was exactly 90%.
Facts to remember
- Generated EMF E = (PφZN)/(60A) = kφN.
- Shunt generator: I_a = I_L + I_f, E = V + I_a R_a (brush drop neglected).
- Linear magnetic circuit: φ ∝ I_f.
- Power input = output + armature copper loss + field circuit loss + core loss + mechanical loss (neglected here).