A uniform plane wave in air is normally incident onto a lossless dielectric plate of thickness λ/8 and intrinsic impedance η = 260 Ω. Determine the standing wave ratio in front of the plate.
10 marks · directive: Determine
The core of a good answer
Treating the plate as a λ/8 section (λ measured in the dielectric) with air behind it, Z_in = 260(377 + j260)/(260 + j377) = 243.0 − j92.4 Ω, |Γ| = 0.260 and the standing wave ratio in front of the plate is s ≈ 1.70.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
A multiple interface problem solved with the transmission line analogy: the plate is a lossless line section of characteristic impedance η terminated by free space, so its input impedance replaces the plate, and the reflection coefficient at the front face gives the SWR.
Answer outline
Introduction
Air on both sides: η₀ = 120π ≈ 377 Ω. Plate: η = 260 Ω, thickness l = λ/8 where λ is the wavelength inside the plate, so βl = (2π/λ)(λ/8) = π/4 and tan βl = 1.
Step 1: Wave impedance at the front face
- Z_in = η (η₀ + jη tan βl)/(η + jη₀ tan βl)
- Z_in = 260 (377 + j260)/(260 + j377)
- Z_in = 243.0 − j92.4 Ω (|Z_in| = 260 Ω, a known result: a λ/8 section maps a real load onto the circle of radius equal to its own impedance)
Step 2: Reflection coefficient
- Γ = (Z_in − η₀)/(Z_in + η₀) = (243.0 − j92.4 − 377)/(243.0 − j92.4 + 377)
- Γ = −0.190 − j0.177 = 0.260 ∠−136.9°
Step 3: Standing wave ratio
- s = (1 + |Γ|)/(1 − |Γ|) = 1.260/0.740 = 1.70
Step 4: Supplementary check
- Fraction of incident power reflected = |Γ|² = 0.067, so about 93.3% is transmitted through the lossless plate into the air behind it.
- Using η₀ = 377 Ω instead of 120π changes s only in the fourth digit (1.7013 against 1.7012).
Conclusion
Standing wave ratio in front of the plate ≈ 1.70 (|Γ| ≈ 0.26); about 93% of the incident power passes through.
Examples and data to cite
- Normal incidence on a layered medium is handled by the same input impedance formula as a lossless transmission line, with η in place of Z₀ and βl as the electrical thickness of the layer.
- A quarter wave plate of impedance √(377 × η_load) is the matching (anti reflection coating) case, whereas a half wave plate is transparent; the λ/8 plate here is neither, so some reflection remains.
Facts to remember
- Input impedance of a lossless section: Z_in = Z₀(Z_L + jZ₀ tan βl)/(Z₀ + jZ_L tan βl).
- Reflection coefficient Γ = (Z_in − η₁)/(Z_in + η₁).
- SWR s = (1 + |Γ|)/(1 − |Γ|).
- Free space intrinsic impedance η₀ = √(μ₀/ε₀) ≈ 120π ≈ 377 Ω.