A circuit consists of a resistor, a variable inductor and a capacitor, all in series. When the circuit is connected across a 300 V, 50 Hz supply, the maximum current is recorded as 0·3 A by varying the inductor. The voltage across the capacitor is then recorded as 900 V. Determine the resistance, inductance and capacitance of the circuit.
10 marks · directive: Determine
The core of a good answer
Maximum current occurs at series resonance, so R = 300/0·3 = 1000 Ω; X꜀ = 900/0·3 = 3000 Ω gives C = 1/(2π × 50 × 3000) = 1·061 μF, and X_L = X꜀ gives L = 3000/(2π × 50) = 9·549 H.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
The question tests the condition for maximum current in a series RLC circuit when the inductance is varied at a fixed frequency, and use of the voltage magnification (Q factor) at resonance.
Answer outline
Introduction
Given: V = 300 V, f = 50 Hz, I_max = 0·3 A, V꜀ = 900 V at that condition; L is variable, R and C fixed.
Step 1: Condition for maximum current
- I = V/√(R² + (X_L − X꜀)²); varying L, I is maximum when X_L = X꜀ (series resonance)
- At resonance the circuit is purely resistive: Z = R
Step 2: Resistance
- R = V/I_max = 300/0·3 = 1000 Ω
Step 3: Capacitance
- V꜀ = I·X꜀, so X꜀ = 900/0·3 = 3000 Ω
- C = 1/(2πfX꜀) = 1/(2π × 50 × 3000) = 1·061 × 10⁻⁶ F = 1·061 μF
Step 4: Inductance
- X_L = X꜀ = 3000 Ω
- L = X_L/(2πf) = 3000/(314·16) = 9·549 H
Step 5: Check
- Q = X꜀/R = 3, and V꜀ = QV = 3 × 300 = 900 V, consistent
- f₀ = 1/(2π√(LC)) = 1/(2π√(9·549 × 1·061 × 10⁻⁶)) = 50 Hz
Conclusion
R = 1000 Ω, L ≈ 9·55 H and C ≈ 1·06 μF; the capacitor voltage is three times the supply voltage because the circuit Q at resonance is 3.
Examples and data to cite
- Voltage magnification at series resonance: the voltages across L and C can be several times the supply voltage, the ratio being the Q of the circuit; here the 300 V supply produces 900 V across both L and C.
- If the inductor were varied away from 9·549 H, X_L would no longer cancel X꜀ and the current would fall below 0·3 A, which is why the maximum reading identifies resonance.
Facts to remember
- Series resonance: X_L = X꜀, ω₀ = 1/√(LC), current maximum and in phase with voltage.
- Quality factor Q = ω₀L/R = 1/(ω₀CR) = V_L/V = V꜀/V at resonance.
- X꜀ = 1/(2πfC), X_L = 2πfL.