A three-stage cascade amplifier given below receives a noise power of 1 × 10⁻¹⁶ W. What will be the output noise power?
[Figure, described in words: P_ni enters amplifier 1 (F₁ = 10, G₁ = 20), whose output feeds amplifier 2 (F₂ = 20, G₂ = 40), whose output feeds amplifier 3 (F₃ = 30, G₃ = 50), giving P_no.]
where Fᵢ and Gᵢ are the noise figure and gain of the iᵗʰ amplifier.
10 marks · directive: Calculate
The core of a good answer
By Friis's formula F = 10 + 19/20 + 29/800 = 10·986, total gain G = 20 × 40 × 50 = 40 000, so P_no = F·G·P_ni = 10·986 × 40 000 × 10⁻¹⁶ ≈ 4·39 × 10⁻¹¹ W.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
The question tests the cascade noise figure (Friis) formula and the definition of noise factor as the ratio of actual output noise to the output noise due to the source alone. The given F and G values are taken as power ratios, not decibels.
Answer outline
Introduction
Given F₁ = 10, F₂ = 20, F₃ = 30 and G₁ = 20, G₂ = 40, G₃ = 50 (numeric ratios), input noise power P_ni = 1 × 10⁻¹⁶ W treated as the source noise at the reference temperature.
Step 1: Overall noise factor
- F = F₁ + (F₂ − 1)/G₁ + (F₃ − 1)/(G₁G₂)
- F = 10 + 19/20 + 29/800 = 10 + 0·95 + 0·03625 = 10·986
- In decibels: 10 log₁₀ 10·986 = 10·41 dB
Step 2: Overall gain
- G = G₁G₂G₃ = 20 × 40 × 50 = 40 000 (46·0 dB)
Step 3: Output noise power
- F = P_no/(G·P_ni), so P_no = F·G·P_ni
- P_no = 10·986 × 40 000 × 1 × 10⁻¹⁶ = 4·394 × 10⁻¹¹ W
Step 4: Split of output noise
- Amplified input noise alone = G·P_ni = 4 × 10⁻¹² W
- Noise added by the amplifiers = (F − 1)G·P_ni = 3·994 × 10⁻¹¹ W, most of it from stage 1
Conclusion
The output noise power is about 4·39 × 10⁻¹¹ W. The first stage dominates the overall noise factor (10 out of 10·99), which shows why the first stage of a receiver should have the lowest noise figure and a high gain.
Examples and data to cite
- The overall noise figure of a receiver is primarily established by its first amplifying stage, the low-noise amplifier; later stages have a diminishing effect.
- If stage 1 and 2 were interchanged the overall noise factor would rise to about 20·26, almost doubling the output noise.
Facts to remember
- Friis formula: F = F₁ + (F₂ − 1)/G₁ + (F₃ − 1)/(G₁G₂) + ..., with F and G as ratios.
- Noise factor F = (S/N)ᵢₙ/(S/N)ₒᵤₜ = P_no/(G·P_ni).
- Noise figure NF (dB) = 10 log₁₀ F.
- Equivalent noise temperature T_e = (F − 1)T₀, T₀ = 290 K.