(ii) For a type-A chopper feeding an R-L-E load, show that the maximum value of average current rating for the freewheeling diode, in case the load current remains continuous, is given by
I_fd max = [(V_s/4R)(1 − E/V_s)²]
where V_s is the input voltage to the chopper.
10 marks · directive: Show
The core of a good answer
With continuous (ripple-free) load current I₀ = (αV_s − E)/R, the freewheeling diode carries it for (1 − α)T, so I_fd = (1 − α)(αV_s − E)/R; setting dI_fd/dα = 0 gives α = (1 + E/V_s)/2 and hence I_fd max = (V_s/4R)(1 − E/V_s)².
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
A derivation: express the average diode current as a function of duty ratio α, then maximise it. The directive 'show that' requires each step and the condition (continuous conduction, ripple neglected) to be stated.
Answer outline
Introduction
In a type-A (first quadrant) step-down chopper, the switch connects V_s to the load for T_on = αT; during T_off = (1 − α)T the load current freewheels through the diode. Load: R, L and back emf E.
Step 1: Average load voltage and current
- V₀ = αV_s (continuous conduction)
- Average load current I₀ = (V₀ − E)/R = (αV_s − E)/R (average voltage across L is zero in steady state)
Step 2: Average freewheeling diode current
- With L large, load current ≈ I₀ (ripple neglected)
- Diode conducts for (1 − α)T, so I_fd = (1 − α)·I₀ = (1 − α)(αV_s − E)/R
Step 3: Maximise with respect to α
- dI_fd/dα = [V_s(1 − α) − (αV_s − E)]/R = (V_s − 2αV_s + E)/R = 0
- α = (V_s + E)/(2V_s) = ½(1 + E/V_s); d²I_fd/dα² = −2V_s/R < 0, so this is a maximum
Step 4: Substitute
- 1 − α = ½(1 − E/V_s); αV_s − E = ½(V_s − E) = ½V_s(1 − E/V_s)
- I_fd max = (1/R) × ½(1 − E/V_s) × ½V_s(1 − E/V_s)
- I_fd max = (V_s/4R)(1 − E/V_s)², as required
Conclusion
The diode rating peaks at the duty ratio α = (1 + E/V_s)/2; for E = 0 this reduces to α = 0·5 and I_fd max = V_s/4R, the familiar result for an R-L load.
Examples and data to cite
- In a DC motor drive fed by a step-down chopper, E is the motor back emf, so the diode rating depends on the speed range over which the drive operates.
- For E = 0·5V_s the maximum occurs at duty ratio 0·75 and equals V_s/16R; the expression vanishes when E = V_s because the load then draws no average current.
Facts to remember
- Type-A chopper: first quadrant, V₀ = αV_s, I₀ = (αV_s − E)/R.
- Average diode current = (1 − α) × average load current when ripple is neglected.
- Average thyristor current = α × I₀; the two add to I₀.
- Maximum of f(α) = (1 − α)(αa − b) occurs at α = (a + b)/2a.