(i) A 240 V, 1200 r.p.m., 15 A, separately excited DC motor has armature resistance of 1·0 Ω. The motor is operated under dynamic braking with chopper control. The braking resistance has a value of 20 Ω.
1. Calculate the duty ratio of the chopper for the motor speed of 1000 r.p.m. and braking torque equal to 1·5 times the rated motor torque.
2. What will be the motor speed for the duty ratio of 0·5 and motor torque equal to its rated torque?
10 marks · directive: Calculate
The core of a good answer
With K = 225/1200 = 0·1875 V per r.p.m. and effective braking resistance R_B(1 − δ), (1) at 1000 r.p.m. and 22·5 A, 187·5 = 22·5[1 + 20(1 − δ)] gives δ = 0·633; (2) at δ = 0·5 and 15 A, E = 15 × 11 = 165 V, so N = 880 r.p.m.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
The question tests chopper-controlled dynamic braking, where a chopper across the braking resistor varies its effective value as R_B(1 − δ), and the linear relations E ∝ N and T ∝ I_a for a separately excited motor.
Answer outline
Introduction
Rated back emf E = V − I_aR_a = 240 − 15 × 1 = 225 V at 1200 r.p.m.; field constant, so E = KN with K = 0·1875 V/r.p.m., and torque ∝ armature current.
Step 1: Effective braking resistance
- The chopper shorts R_B for δT, so the average resistance seen by the armature is R_B(1 − δ)
- Braking loop: E = I_a[R_a + R_B(1 − δ)]
Step 2: Part 1, duty ratio
- Braking torque 1·5 × rated, so I_a = 1·5 × 15 = 22·5 A
- E at 1000 r.p.m. = 0·1875 × 1000 = 187·5 V
- R_a + R_B(1 − δ) = 187·5/22·5 = 8·333 Ω
- 20(1 − δ) = 7·333, so 1 − δ = 0·3667 and δ = 0·633
Step 3: Part 2, speed
- Rated torque, so I_a = 15 A; δ = 0·5, so R_B(1 − δ) = 10 Ω
- E = 15(1 + 10) = 165 V
- N = 165/0·1875 = 880 r.p.m.
Conclusion
The chopper must run at about 63·3% duty to brake at 1·5 times rated torque from 1000 r.p.m., and at 50% duty rated braking torque is obtained at 880 r.p.m. Raising δ lowers effective resistance and lets braking at rated torque continue to lower speeds.
Examples and data to cite
- Dynamic braking is called rheostatic when the generated power is dissipated as heat in braking grid resistors; it is used on railcars, light rail vehicles and electric trams.
- At δ = 1 only R_a remains, so rated braking torque would be held down to 80 r.p.m. (15 V/0·1875).
Facts to remember
- Separately excited DC machine: E = Kφω, T = Kφ I_a.
- Effective resistance of a chopper-shunted resistor: R_eff = R(1 − δ).
- Dynamic braking current: I_a = E/(R_a + R_eff).