Discuss the saturated-reactor compensator with the help of circuit diagram and V-I characteristics. How can a lower slope of V-I characteristics be obtained ? Also write the main features of the saturated-reactor compensator.
10 marks · directive: Discuss
The core of a good answer
A saturated-reactor compensator is a shunt reactor whose iron core saturates just above the desired voltage, so its lagging current rises steeply with voltage and holds the bus voltage nearly constant; a capacitor in series with the reactor lowers the slope of the V-I characteristic, and a shunt capacitor bank extends operation into the capacitive region.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
A static compensator topic from power systems. The answer should describe the circuit in words, explain why magnetic saturation gives a nearly flat V-I characteristic, show how a series capacitor lowers the slope, and list the main features of the scheme.
Answer outline
Introduction
In a saturated-reactor compensator the voltage regulation comes from the magnetic saturation of the reactor core itself, not from an external control loop or switching devices.
Circuit
- A saturable (iron-cored) reactor connected in shunt at the bus to be regulated
- A slope-correction capacitor connected in series with the reactor
- A shunt capacitor bank connected in parallel with the reactor branch to supply leading reactive power at lower voltages
- Harmonic filters at the bus, since a saturated core produces odd harmonics
V-I characteristic and operation
- Below the knee the core is unsaturated, permeability is high, the reactance is large and the reactor draws only a small current
- As the core approaches saturation its relative permeability falls towards one, so the incremental inductance becomes small
- Above the knee a small rise in voltage therefore produces a large rise in lagging current: the characteristic is nearly flat and the bus voltage is held close to the knee voltage
- The shunt capacitor draws a leading current V/Xc proportional to voltage, which shifts the combined characteristic so that the compensator supplies vars at low voltage and absorbs vars at high voltage
Obtaining a lower slope
- In the saturated region the slope of the V-I characteristic equals the incremental reactance of the reactor, XSL
- Reactances in series add and a capacitor's reactance is negative, so a series capacitor of reactance XCS reduces the branch slope to XSL − XCS
- Choosing XCS close to, but less than, XSL gives a much flatter characteristic and tighter voltage regulation
Main features
- No firing circuits, measurement or control loop: regulation is inherent in the core's magnetic properties
- The voltage level is set by the core design (the knee), so the regulated voltage cannot be changed by a control signal
- Saturation of the iron core generates odd harmonics, mainly the third and fifth, so filters or harmonic-reducing arrangements are needed
- Like other static compensators it can be used near fluctuating loads to smooth voltage flicker
- Mains-frequency saturable reactors are bulkier and costlier than thyristor controllers, which have largely replaced them
Conclusion
The saturated-reactor compensator regulates voltage passively through core saturation; a series slope-correction capacitor flattens its V-I characteristic and a shunt capacitor bank sets its capacitive range, while thyristor-controlled static var compensators have since taken over most of its role.
Examples and data to cite
- The thyristor-based static var compensator is described as the first modern FACTS device; it varies effective inductance with a thyristor-controlled reactor and can switch capacitor banks quickly.
- Static var compensators are used near arc furnaces to smooth voltage flicker.
- The ferroresonant (constant voltage) transformer uses the same principle of core saturation to act as a voltage regulator.
Facts to remember
- Relative permeability of a ferromagnetic core falls towards one as the core approaches saturation, so the inductance of a saturable core varies with current.
- A saturated iron core driven by a.c. produces odd harmonics, mainly third and fifth.
- Slope of the V-I curve in the saturated region equals the incremental reactance of the reactor; with a series capacitor the net slope is XSL − XCS.
- Shunt capacitor current Ic = V/Xc leads the voltage by 90°.
- Mains-frequency saturable reactors have largely been replaced by thyristor controllers.