Determine the response of the system shown in the following figure when it is excited by a unit step input.
[Figure, described in words: R(s) enters a summing junction (+); the junction output passes through a block s + 1 and then a block 2/s² in cascade to give C(s); C(s) is fed back directly to the summing junction with a negative sign (unity negative feedback).]
20 marks · directive: Determine
The core of a good answer
The closed-loop transfer function is C(s)/R(s) = 2(s + 1)/(s² + 2s + 2), and the unit step response is c(t) = 1 + e^(−t)(sin t − cos t) = 1 − √2 e^(−t) cos(t + π/4), with a 20.8% overshoot at t = π/2 s and zero steady-state error.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
Block diagram reduction followed by inverse Laplace transformation. The candidate should reduce the loop, find C(s) for R(s) = 1/s, expand in partial fractions, invert, and then interpret the response (poles, zero, overshoot, steady state).
Answer outline
Introduction
Forward path G(s) = (s + 1) × 2/s² = 2(s + 1)/s²; feedback H(s) = 1; input R(s) = 1/s.
Step 1: Closed-loop transfer function
- C(s)/R(s) = G/(1 + G) = 2(s + 1)/(s² + 2(s + 1)) = 2(s + 1)/(s² + 2s + 2)
- Poles: s = −1 ± j1 (ωn = √2 rad/s, ζ = 1/√2 = 0.707); zero at s = −1
Step 2: Output for unit step
- C(s) = 2(s + 1)/(s(s² + 2s + 2))
Step 3: Partial fractions
- C(s) = A/s + (Bs + D)/(s² + 2s + 2)
- A = 2(1)/2 = 1
- 2s + 2 = (s² + 2s + 2) + (Bs + D)s gives B = −1, D = 0
- C(s) = 1/s − s/((s + 1)² + 1) = 1/s − (s + 1)/((s + 1)² + 1) + 1/((s + 1)² + 1)
Step 4: Inverse Laplace transform
- c(t) = 1 − e^(−t) cos t + e^(−t) sin t, for t ≥ 0
- Equivalently c(t) = 1 − √2 e^(−t) cos(t + π/4)
Step 5: Time-domain features
- dc/dt = 2e^(−t) cos t = 0 gives peak time tp = π/2 = 1.571 s
- c(tp) = 1 + e^(−π/2) = 1.208, so peak overshoot = 20.8%
- Settling time (2% band) about 3.46 s from the exact response
- c(∞) = 1 (by final value theorem: lim sC(s) = 2/2 = 1), so steady-state error = 0 (type 2 loop)
Conclusion
c(t) = 1 + e^(−t)(sin t − cos t). Checks: c(0) = 0, initial slope dc/dt(0) = 2 (non-zero because the closed-loop transfer function has relative degree one), and c(∞) = 1.
Examples and data to cite
- Although ζ = 0.707 normally gives only 4.3% overshoot, the closed-loop zero at s = −1 raises the overshoot to 20.8%: the zero adds a derivative component to the response.
- The open loop 2(s + 1)/s² is type 2, so the closed loop follows a step and a ramp with zero steady-state error.
Facts to remember
- Closed-loop transfer function with unity negative feedback: T = G/(1 + G).
- Laplace pairs: L[e^(−at) cos ωt] = (s + a)/((s + a)² + ω²); L[e^(−at) sin ωt] = ω/((s + a)² + ω²).
- Final value theorem: c(∞) = lim(s→0) sC(s).
- A left-half-plane zero near the dominant poles increases overshoot and speeds up the rise.