A system has a unit response as c(t) = 1 − e^(−0·5t). Evaluate its unit impulse and unit ramp response, assuming zero initial conditions.
10 marks · directive: Evaluate
The core of a good answer
Taking c(t) = 1 − e^(−0.5t) as the unit step response, the transfer function is 0.5/(s + 0.5); the unit impulse response is 0.5e^(−0.5t) and the unit ramp response is t − 2 + 2e^(−0.5t), for t ≥ 0.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
For an LTI system with zero initial conditions, the impulse response is the derivative of the step response and the ramp response is its integral. The candidate may work in the time domain or via the transfer function; both are shown here.
Answer outline
Introduction
The given response 1 − e^(−0.5t) is the unit step response (a unit step is the standard test input implied). Zero initial conditions are assumed.
Step 1: Transfer function
- C(s) = 1/s − 1/(s + 0.5) = 0.5/(s(s + 0.5))
- With R(s) = 1/s, T(s) = C(s)/R(s) = 0.5/(s + 0.5)
Step 2: Unit impulse response
- R(s) = 1, so C(s) = 0.5/(s + 0.5)
- g(t) = 0.5e^(−0.5t), t ≥ 0
- Check: d/dt (1 − e^(−0.5t)) = 0.5e^(−0.5t)
Step 3: Unit ramp response
- R(s) = 1/s², so C(s) = 0.5/(s²(s + 0.5)) = 1/s² − 2/s + 2/(s + 0.5)
- c_ramp(t) = t − 2 + 2e^(−0.5t), t ≥ 0
- Check: ∫ from 0 to t of (1 − e^(−0.5τ)) dτ = t − 2 + 2e^(−0.5t)
Step 4: Interpretation
- First-order system with time constant τ = 2 s and unity d.c. gain
- Ramp response lags the input by τ = 2 s in steady state: steady-state error = 2
Conclusion
Impulse response 0.5e^(−0.5t); ramp response t − 2 + 2e^(−0.5t). Both start at the correct initial values (0.5 and 0) and the ramp error tends to τ = 2.
Examples and data to cite
- For a first-order system K/(τs + 1), the ramp steady-state error equals τ when K = 1.
- The impulse response integrated over all time equals the d.c. gain: ∫ 0.5e^(−0.5t) dt = 1.
Facts to remember
- Impulse response = d/dt (step response); ramp response = ∫ step response dt, for LTI systems with zero initial conditions.
- L[e^(−at)] = 1/(s + a); L[t] = 1/s².
- First-order system time constant τ: step response 1 − e^(−t/τ).
- Transfer function T(s) = L[impulse response].