Pratidin
2026 · Electrical Engineering Optional Paper II · 10 marksMainsQuestion 8bii

A binary FSK system transmits binary data at the rate of 2·5 × 10⁶ bits per second. During the course of transmission, white Gaussian noise of zero mean and power spectral density 10⁻²⁰ watts per hertz is added to the signal. In the absence of noise, the amplitude of the received signal is 1 μV across 50 Ω impedance. Determine the average probability of error assuming coherent detection of the binary FSK signal.

10 marks · directive: Determine

Answer

The core of a good answer

With A = 1 μV across 50 Ω the received power is A²/2R = 10⁻¹⁴ W, so E_b = 10⁻¹⁴ × 0.4 μs = 4 × 10⁻²¹ J; taking the given PSD as η/2 = N₀/2 = 10⁻²⁰ W/Hz (N₀ = 2 × 10⁻²⁰), E_b/N₀ = 0.2 and P_e = ½ erfc(√(E_b/2N₀)) = ½ erfc(√0.1) ≈ 0.33, a very poor link.

An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work

What the question asks

The question applies the bit error probability of coherently detected orthogonal BFSK. The method: find bit duration, bit energy from the received amplitude and the stated load resistance, the noise density, then P_e = ½ erfc(√(E_b/2N₀)).

Answer outline

Introduction

Given R_b = 2.5 × 10⁶ b/s, two sided noise PSD N₀/2 = 10⁻²⁰ W/Hz (the convention used in Q8(b)(i), where η/2 is the PSD), amplitude A = 1 μV across R = 50 Ω, coherent detection.

Step 1: Bit duration

Step 2: Received signal power

Step 3: Energy per bit

Step 4: Noise density

Step 5: Probability of error for coherent BFSK

Step 6: Sensitivity to assumptions

Conclusion

P_e ≈ 0.33 with the stated 50 Ω load and two sided PSD convention: the signal energy is far too small relative to the noise for reliable detection. A useful link would need E_b/N₀ of about 12.6 dB for P_e near 10⁻⁵ with coherent BFSK.

Examples and data to cite

Facts

Facts to remember

Sources used for the explanation

Write a timed answer in the app