What is earthquake? How is the epicenter of an earthquake determined? Discuss on the disaster risk associated with earthquakes of different magnitudes.
20 marks · directive: Discuss
The core of a good answer
An earthquake is the shaking of the ground caused by a sudden release of energy in the lithosphere, usually by slip on a fault; its epicentre is located from the S minus P arrival-time difference at three or more seismograph stations, which gives distances whose circles intersect at the epicentre (trilateration); each unit step of magnitude releases about 32 times more energy, but actual losses depend also on depth, ground conditions, building vulnerability and exposure.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
Three parts: define earthquake with its causes and terms; explain the method of locating the epicentre with a worked idea; and discuss how hazard and risk vary with magnitude, including frequency, intensity and vulnerability, with Indian examples.
Answer outline
Introduction
An earthquake is the shaking of the earth's surface from a sudden release of energy in the lithosphere, most often when stress on a locked fault builds up until the rocks slip and rebound elastically (Harry Fielding Reid's elastic rebound theory, from the 1906 San Francisco earthquake).
Earthquake basics
- Focus (hypocentre): point of initial rupture; epicentre: point at ground level directly above it.
- Causes: tectonic (stored elastic strain energy on faults), volcanic, landslides, mine blasts, fracking, nuclear tests and building of reservoirs.
- Depth classes: shallow (under 70 km), intermediate (70 to 300 km), deep (300 to 700 km).
- Waves: P (pressure waves, fastest, pass through solids and fluids), S (shear waves, slower, only through solids), and surface waves (Love and Rayleigh); S and surface waves do most of the damage.
Determining the epicentre
- Read the arrival times of P and S waves on seismograms at a station; S waves arrive later because Vs < Vp.
- Distance d = Δt × Vp × Vs / (Vp − Vs), where Δt is the S minus P time (from d/Vs − d/Vp = Δt).
- With illustrative crustal values Vp = 6.0 km/s and Vs = 3.5 km/s: d = Δt × (6.0 × 3.5 / 2.5) = 8.4 km per second of S minus P time; for Δt = 10 s, d = 84 km. This agrees with the rule of thumb of multiplying the S minus P seconds by about 8.
- For larger distances read the distance from a travel-time graph.
- One station gives a circle of possible locations, two give two intersecting points; a third station fixes the epicentre (trilateration). Modern computer programs use an iterative guess-and-correction method with a model of local seismic velocities.
Magnitude and intensity
- Magnitude measures the earthquake at its source: Richter local magnitude ML (1935) and moment magnitude Mw (Hanks and Kanamori, 1979) based on seismic moment; one unit increase means 10 times larger amplitude and about 32 times more energy; two units mean 1,000 times more energy.
- Intensity rates observed effects at a place (Mercalli and Medvedev-Sponheuer-Karnik scales).
Disaster risk by magnitude
- Frequency falls with size: about 500,000 earthquakes a year are detectable and about 100,000 felt; each unit rise in magnitude has about one tenth as many events; the USGS counts on average 18 major (M 7.0 to 7.9) and one great (M 8 or more) earthquakes a year.
- M 6 to 6.9: can be very destructive when shallow and under towns: Latur, 1993 (Mw 6.2, about 10 km deep, intraplate), about 10,000 deaths; Sikkim, 2011 (Mw 6.9), where heavy rain and landslides hampered rescue.
- M 7 to 7.9: major earthquakes: Bhuj, 2001 (Mw 7.7 by USGS), at least 20,023 deaths; Gorkha, Nepal, 2015 (Mw 7.8 to 7.9), 8,962 deaths; Turkey-Syria, 2023 (Mw 7.8), over 50,000 deaths.
- M 8 and above: great earthquakes; tsunamis from subduction megathrusts (Sumatra-Andaman, 2004; Tohoku, Japan, 2011, magnitude 9).
- Secondary hazards: liquefaction of water-saturated granular soil, landslides, fires from broken power and gas lines, floods from damaged dams, and tsunamis.
Reducing risk
- Seismic zonation and building codes: IS 1893 (Part 1) 2002 is India's earthquake resistant design code, and its zoning map divides India into four seismic zones (2 to 5); under extreme events, structural damage should not result in total collapse.
- Retrofitting of weak buildings, land-use planning that avoids liquefiable soils, early warning and preparedness.
Conclusion
Magnitude sets the energy of an earthquake, but as the shallow Mw 6.2 Latur event showed, depth, location and construction decide the toll, so the risk from any magnitude is reduced most by safe construction and preparedness.
Examples and data to cite
- Bhuj (Gujarat) earthquake, 26 January 2001, Mw 7.7 (USGS; 7.6 by the ISC): at least 20,023 deaths.
- Latur (Maharashtra) earthquake, 30 September 1993, Mw 6.2, about 10 km deep, an intraplate event in stable continental crust: about 10,000 deaths.
- Gorkha, Nepal, 25 April 2015, Mw 7.8 to 7.9: 8,962 deaths.
- Sumatra-Andaman earthquake, 26 December 2004, USGS Mw 9.1: its tsunami severely affected the Nicobar Islands and the Tamil Nadu coast, worst in Nagapattinam district.
- Turkey-Syria earthquakes of 6 February 2023, main shock Mw 7.8, over 50,000 deaths.
Facts to remember
- S minus P time method: d = Δt Vp Vs / (Vp − Vs); at least three stations are needed to fix an epicentre.
- Energy increases about 32 times (10 raised to 1.5) per unit of magnitude.
- Moment magnitude does not saturate for large earthquakes, unlike other scales.
- Intensity rates observed effects at a place, while magnitude describes the earthquake at its source.