Answer the following questions in about 150 words each :
Explain the morphometry of a drainage basin and its significance in groundwater studies.
10 marks · answer in 150 words · directive: Explain
The core of a good answer
Drainage basin morphometry is the quantitative measurement of a basin's network and shape (stream order, bifurcation ratio, drainage density, overland flow length, basin shape), and because these depend on lithology, permeability and infiltration they help to judge where water soaks in and where it runs off, guiding groundwater exploration and watershed planning.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
The question asks for the main morphometric parameters, how they are measured, and how they are interpreted hydrogeologically. Definitions and their meaning for infiltration, runoff and base flow should be stated.
Answer outline
Introduction
Quantitative morphometry of drainage basins was founded by Robert E. Horton (1945) and Arthur N. Strahler (1952, 1957); it measures the geometry of a drainage network from topographic maps or digital elevation data.
Linear aspects
- Stream order (Strahler): streams with no tributaries are first order; two streams of the same order u join to form a stream of order u + 1.
- Bifurcation ratio Rb = Nu / N(u+1), the number of streams of one order divided by the number of the next higher order; it is dimensionless and most British rivers have values between 3 and 5.
- A high bifurcation ratio means a lower time of concentration and a higher chance of flooding.
Areal aspects
- Drainage density Dd = total channel length / basin area (for example km per km²), defined by Horton.
- Length of overland flow: Horton took half of the inverse of drainage density, 1 / (2 Dd), as the average length of overland flow.
- Basin shape: a long thin basin takes longer to drain than a circular one.
Significance for groundwater
- Low permeability ground (clay, solid rock) produces high drainage density; higher infiltration reduces drainage density.
- As drainage density rises, base flow into streams falls because less water infiltrates; low drainage density therefore points to permeable terrain with better recharge.
- High drainage density drains a basin efficiently, giving higher peak flows and a steeper falling limb of the hydrograph, so less water is left to recharge aquifers.
- Elongated basins deliver runoff more slowly, allowing more time for infiltration than compact, circular basins.
- Drainage pattern reflects rock type: rock that erodes easily gives dendritic patterns, the most common type; trellis and rectangular patterns are the other main types.
- Combining these parameters for sub basins helps to rank them for recharge structures and to locate zones of better groundwater potential.
Conclusion
Morphometric analysis is a quick, inexpensive way to infer the hydrogeological behaviour of ungauged basins from maps alone and to plan where water conservation and recharge efforts will work best.
Examples and data to cite
- Horton (1945), 'Erosional development of streams and their drainage basins; hydrophysical approach to quantitative morphology', GSA Bulletin 56: the foundation paper of basin morphometry.
- Sandy soils absorb much rainfall and give low drainage density, while clay soils can be almost impermeable and give dense networks.
Facts to remember
- Rb = Nu / N(u+1); commonly 3 to 5.
- Dd = ΣL / A.
- Length of overland flow ≈ 1 / (2 Dd).
- Horton (1945) and Strahler (1952, 1957) laid the foundations of quantitative morphometry.