Answer the following questions in about 150 words each.
Discuss the different types of prospecting methods used for locating metallic mineral deposits.
10 marks · answer in 150 words · directive: Discuss
The core of a good answer
Metallic deposits are located by combining geological (mapping and guides), geochemical (stream sediment, soil, rock, water and biogeochemical surveys), geophysical (magnetic, gravity, electrical, electromagnetic, radiometric and seismic surveys) and remote sensing methods, with drilling used to confirm and delineate the target.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
The question asks for a classified account of prospecting methods with the physical or chemical basis of each and the deposits it suits. A good answer moves from regional to local scale and stresses that methods are used together.
Answer outline
Introduction
Prospecting is the search for indications of a mineral deposit; it narrows large areas to drill targets, from desk research and regional surveys to drilling.
Geological methods
- Geological mapping, study of host rocks, structures and alteration halos (for example the central potassic and the quartz sericite zones of porphyry copper deposits).
- Gossans (oxidised, iron oxide and quartz caps over ore deposits) used by prospectors as clues to buried ore.
- Satellite and aerial remote sensing surveys.
Geochemical methods
- Stream sediment, soil and rock sampling with chemical analysis to trace anomalies above background; soil sampling is one of the most popular exploration tools.
- Geobotanical methods using copper tolerant indicator plants.
Geophysical methods
- Magnetic surveys (ground or airborne) for magnetite bearing banded iron formations and skarns and for magnetite, hematite or pyrrhotite linked to hydrothermal alteration.
- Gravity surveys for dense bodies in less dense host rock, such as iron ore, skarn and IOCG deposits.
- Electrical methods: resistivity and induced polarisation (IP), which detects sulphide bodies; electromagnetic (EM) methods for conductivity anomalies around base metal sulphide bodies.
- Airborne gamma spectrometric (radiometric) mapping; seismic methods mainly for structures that host deposits.
Confirmation
- Drilling for core or cuttings to test anomalies, find the limits of the deposit and estimate the valuable material present.
Conclusion
No single method is decisive; an integrated geological, geochemical and geophysical model reduces the cost and risk of discovery.
Examples and data to cite
- Gossans, stained red, orange or yellow by iron oxides, were used by 19th and 20th century prospectors as clues to buried ore deposits.
- The copper flower Ocimum centraliafricanum of central Africa tolerates soil copper up to 15,000 ppm and is used in geobotanical prospecting.
- Kimberlite pipes have lower electrical resistance than the surrounding rock, and EM surveys are also used to find kimberlite and graphite.
Facts to remember
- Magnetic surveys map magnetic anomalies; gravity detects density contrast; IP measures chargeability; EM detects conductivity anomalies.
- Induced polarisation is measured in the time domain (integral chargeability) or the frequency domain (spectral IP).
- Airborne magnetometric and gamma spectrometric maps are common exploration tools.