Answer the following questions in about 150 words each.
What are the causes of groundwater and surface water pollution ? Explain.
10 marks · answer in 150 words · directive: Explain
The core of a good answer
Surface water is polluted mainly by untreated sewage, industrial effluents and agricultural runoff, while groundwater is polluted both by human sources (leaching of fertilisers and pesticides, leaking septic tanks and landfills) and by geogenic sources such as arsenic, fluoride and iron dissolved from aquifer rocks.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
The question asks for the causes of pollution of two connected water bodies. A good answer distinguishes point and non-point sources, explains why groundwater pollution is slow to appear and hard to reverse, and gives Indian examples of geogenic contamination.
Answer outline
Introduction
Water pollution is any change in the physical, chemical or biological quality of water that makes it harmful for its intended use; surface and groundwater are linked through recharge and base flow, so pollutants pass between them.
Surface water pollution
- Point sources (one identifiable cause): municipal sewage carrying nutrients, pathogens and organic matter with high BOD; industrial effluents with heavy metals such as mercury, lead and chromium and toxic solvents; warm cooling water from power plants, which holds less dissolved oxygen.
- Non-point sources: agricultural runoff with nitrogen and phosphorus causing eutrophication; urban storm water carrying heavy metals from vehicles and de-icing salts.
- Acid mine drainage from mining, partly from oxidation of pyrite left in tailings.
Groundwater pollution: anthropogenic
- Leaching of nitrate from fertilisers, manure and on-site sanitation, and of pesticides, through the soil.
- Leachate from landfills, septic tanks and pit latrines.
- Saltwater intrusion into coastal aquifers, natural but very often intensified by human activities.
Groundwater pollution: geogenic
- Arsenic released from the rocks surrounding aquifers, as in the Ganges delta (wells typically 20 to 100 m deep) and in Bihar along the Ganga and Gandak.
- Fluoride from the mineral fluorite, released especially from acidic volcanic rocks and volcanic ash, with high levels typically where aquifer calcium is low.
- Iron, manganese, salinity, radon and uranium from geogenic sources in some aquifers.
Conclusion
Prevention (sewage treatment, effluent norms, controlled fertiliser use, safe landfill design) is far cheaper than remediation.
Examples and data to cite
- In 1993 groundwater in large parts of Bangladesh was found to be naturally contaminated with arsenic; the issue came to international attention in 1995.
- As of 2016, 746 industries were reported to be discharging wastewater directly into the Ganga.
- Namami Gange Programme, announced in 2014 and approved by the Union Cabinet in May 2015, for abatement of pollution in the Ganga.
- Untreated sewage is the largest source of water pollution in India; nitrate exceeds the safe limit in groundwater in about 56 per cent of Indian districts.
Facts to remember
- WHO guideline values: arsenic 10 µg/L, fluoride 1.5 mg/L.
- Biochemical oxygen demand (BOD) is the main indicator of biodegradable organic matter, whose effects include oxygen consumption and fish deaths.
- Dense solvents (DNAPLs) can sink deep in aquifers and persist, while lighter fuels (LNAPLs) float on the water table.
- Point sources have one identifiable cause; non-point sources, such as agricultural runoff, are diffuse.