A uniform heavy solid hemisphere of radius 'a' is held at rest with its base vertical and its curved surface in contact with a horizontal plane. If the hemisphere is released when the plane is rough enough to prevent slipping, show that the angle θ that the base makes with the horizontal at time t, is such that (dθ/dt)² = 15 g cos θ / [a (28 − 15 cos θ)].
10 marks · directive: Show
The core of a good answer
With G at 3a/8 from the centre O and rolling about the contact point C, energy conservation gives (1/2)M a²[(28 − 15 cos θ)/20] θ̇² = Mg(3a/8) cos θ, so θ̇² = 15g cos θ/[a(28 − 15 cos θ)].
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
A rolling rigid body problem. Since the plane is rough enough to prevent slipping, friction does no work and the energy equation suffices. The answer needs the centre of mass position, the moment of inertia about the instantaneous contact point (via parallel axes), the height of G in terms of θ, and the energy balance from the initial position θ = π/2.
Answer outline
Introduction
Let O be the centre of the base, G the centre of mass, M the mass. The angle the base makes with the horizontal equals the angle the axis OG makes with the downward vertical, θ. Initially the base is vertical, so θ = π/2 and θ̇ = 0. O stays at height a above the plane, with the contact point C vertically below it.
Step 1: Centre of mass and moments of inertia
- OG = 3a/8 for a solid hemisphere
- Moment of inertia about a diameter of the base through O: I_O = (2/5)Ma²
- About the parallel axis through G: I_G = (2/5)Ma² − M(3a/8)² = (83/320)Ma²
Step 2: Moment of inertia about the contact point
- CG² = a² + (3a/8)² − 2a(3a/8)cos θ (triangle OCG, angle COG = θ)
- I_C = I_G + M·CG² = Ma²(7/5 − (3/4) cos θ)
- = Ma²(28 − 15 cos θ)/20
Step 3: Energy
- C is the instantaneous centre of rotation (no slipping), so KE = (1/2) I_C θ̇²
- Height of G above the plane: a − (3a/8) cos θ
- Fall of G from θ = π/2: (3a/8) cos θ
- Friction at C does no work and the normal reaction does none, so KE gained = PE lost:
- (1/2)Ma²[(28 − 15 cos θ)/20] θ̇² = Mg(3a/8) cos θ
Step 4: Solve
- θ̇² = 2 × (3/8) × 20 g cos θ/[a(28 − 15 cos θ)]
- θ̇² = 15 g cos θ/[a(28 − 15 cos θ)], as required.
Conclusion
The result follows from energy conservation; at θ = π/2 it gives θ̇ = 0 as it should, and θ̇² is greatest at θ = 0, where it equals 15g/(13a). The algebra for I_C and θ̇² was checked symbolically in Python.
Examples and data to cite
- The same set up with a smooth plane gives a different result, because then G moves only vertically and the energy equation uses I_G and the vertical speed of G.
- Using I_C is valid for the energy (KE = (1/2)I_C ω² at each instant) even though C moves along the plane.
Facts to remember
- Centre of mass of a solid hemisphere: 3a/8 from the plane face along the axis.
- Moment of inertia of a solid hemisphere about any diameter of its base: (2/5)Ma² (same as a full sphere about a diameter).
- Parallel axis theorem: I = I_G + Md².
- For rolling without slipping, KE = (1/2) I_C ω² where C is the instantaneous point of contact, and friction does no work.