The effective turning moment of a two-wheeler engine crankshaft for every 180° of crank rotation is represented by :
T (N-m) = 8000 + 1000 sin 2θ − 2000 cos 2θ
where θ is the crank inclination with respect to the inner dead centre. A flywheel of 500 kg mass with radius of gyration of 750 mm is provided on the crank. Assuming external resistance as constant at an engine speed of 300 rpm, determine :
(i) The maximum, minimum and mean torques. Also represent them on a T − θ diagram.
(ii) The power developed.
(iii) Total percentage fluctuation in speed.
(iv) If, owing to size constraints, radius of gyration of the flywheel is reduced to 600 mm, will the percentage (%) fluctuation of speed increase ? If yes, then by how much ?
20 marks · directive: Determine
The core of a good answer
T_mean = 8000 N·m, T_max = 10236 N·m (θ = 76·7°), T_min = 5764 N·m (θ = 166·7°); power = 251·3 kW; ΔE = 2236 J gives a total speed fluctuation of 0·806%, which rises to 1·259% (an increase of 0·453 percentage points, 56·25% more) when k is reduced to 600 mm.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
A flywheel problem from a turning moment equation. The mean torque is the average over one cycle (π radians); the fluctuation T − T_mean is a sinusoid whose positive lobe gives the maximum fluctuation of energy ΔE. Then C_s = ΔE/(Iω²) with I = mk², and for part (iv) C_s varies as 1/k².
Answer outline
Introduction
ω = 2π(300)/60 = 31·416 rad/s; I = 500 × 0·75² = 281·25 kg·m². The cycle repeats every 180° (π rad) of crank rotation.
Step 1: Mean, maximum and minimum torque
- T_mean = (1/π)∫₀^π T dθ = 8000 N·m (sine and cosine of 2θ average to zero over π)
- 1000 sin 2θ − 2000 cos 2θ = 2236·1 sin(2θ − 63·43°), since √(1000² + 2000²) = 2236·1 and tan α = 2
- T_max = 8000 + 2236 = 10236 N·m at 2θ − 63·43° = 90°, θ = 76·7°
- T_min = 8000 − 2236 = 5764 N·m at θ = 166·7°
- T − θ diagram: a sinusoid about the 8000 N·m mean line, crossing it at θ = 31·7° and 121·7°; at θ = 0 and 180°, T = 6000 N·m
Step 2: Power
- P = T_mean ω = 8000 × 31·416 = 251·3 kW
Step 3: Maximum fluctuation of energy
- ΔE = ∫ from 31·7° to 121·7° of 2236·1 sin(2θ − 63·43°) dθ
- = 2236·1 × [−cos(2θ − α)/2] over the lobe = 2236·1 × 1 = 2236 J
Step 4: Speed fluctuation
- C_s = ΔE/(Iω²) = 2236/(281·25 × 31·416²) = 0·008056
- Total fluctuation = 0·806% of mean speed (±0·403%)
Step 5: k reduced to 600 mm
- I = 500 × 0·6² = 180 kg·m²
- C_s = 2236/(180 × 986·96) = 0·012587 = 1·259%
- Yes, it increases by 1·259 − 0·806 = 0·453 percentage points, that is by the factor (0·75/0·6)² = 1·5625 (56·25% more)
Conclusion
Mean 8000 N·m, maximum 10236 N·m, minimum 5764 N·m, power 251·3 kW, speed fluctuation 0·806% rising to 1·259% with k = 600 mm. Check: ΔE equals the amplitude 2236 because each lobe of sin 2θ has area 1 per unit amplitude. (Recomputed in Python.)
Examples and data to cite
- A flywheel is used to smooth the angular velocity fluctuations of the crankshaft in a reciprocating engine, storing energy when the torque is above the mean.
- Reducing k is costly because I varies with k², so a compact flywheel must be heavier for the same C_s.
Facts to remember
- Mean torque = (work per cycle)/(angle per cycle).
- Kinetic energy E = ½Iω², so the maximum fluctuation of energy ΔE = ½I(ω_max² − ω_min²) = Iω²C_s, where C_s = (ω_max − ω_min)/ω.
- Mass moment of inertia from the radius of gyration: I = mk².
- a sin x − b cos x = √(a² + b²) sin(x − α), tan α = b/a.
- Power = T_mean × ω (work per cycle divided by time per cycle).