The surface of an airplane wing is subjected to plane stress with normal stresses σ_x and σ_y and shear stress τ_xy, as shown in the figure. At a counterclockwise angle θ = 32° from the x-axis, the normal stress is 37 MPa tension, and at an angle θ = 48°, it is 12 MPa compression. If the stress σ_x equals 110 MPa tension, what are the stresses σ_y and τ_xy ?
[Figure, described: a plane stress element with σ_x = 110 MPa along x, σ_y along y and τ_xy, all drawn in the positive sense.]
10 marks · directive: Determine
The core of a good answer
Writing σ_θ = (σ_x + σ_y)/2 + (σ_x − σ_y)/2 cos 2θ + τ_xy sin 2θ for θ = 32° and 48° gives two linear equations, whose solution is σ_y = −60·7 MPa (compression) and τ_xy = −27·9 MPa.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
Stress transformation used in reverse: two known normal stresses on inclined planes, with σ_x known, give two equations in σ_y and τ_xy. The method is to substitute into the transformation equation and solve the linear pair.
Answer outline
Introduction
σ_x = 110 MPa; σ₃₂ = +37 MPa; σ₄₈ = −12 MPa. Angles measured anticlockwise from x.
Step 1: Rearranged equation
- σ_θ = σ_x(1 + cos 2θ)/2 + σ_y(1 − cos 2θ)/2 + τ_xy sin 2θ
Step 2: θ = 32° (2θ = 64°, cos 0·4384, sin 0·8988)
- 37 = 110(0·7192) + σ_y(0·2808) + 0·8988τ_xy
- 0·2808σ_y + 0·8988τ_xy = −42·11
Step 3: θ = 48° (2θ = 96°, cos −0·1045, sin 0·9945)
- −12 = 110(0·4477) + σ_y(0·5523) + 0·9945τ_xy
- 0·5523σ_y + 0·9945τ_xy = −61·25
Step 4: Solve
- σ_y = −60·67 MPa
- τ_xy = −27·90 MPa
Step 5: Check
- θ = 32°: 24·66 + 85·33(0·4384) − 27·90(0·8988) = 37·0 MPa
- θ = 48°: 24·66 + 85·33(−0·1045) − 27·90(0·9945) = −12·0 MPa
Conclusion
σ_y = 60·7 MPa compression and τ_xy = −27·9 MPa (acting opposite to the sense drawn). Both given normal stresses are reproduced. (Recomputed in Python.)
Examples and data to cite
- Mohr's circle offers a graphical check of the same solution: the two given normal stresses lie on the circle at 2θ = 64° and 96° from the x point.
Facts to remember
- Plane stress transformation: σ_θ = (σ_x + σ_y)/2 + (σ_x − σ_y)/2 cos 2θ + τ_xy sin 2θ (parametric equations of Mohr's circle).
- A negative τ_xy acts opposite to the positive sense drawn on the element.
- Two independent normal-stress readings plus σ_x fix the plane stress state (two linear equations in σ_y and τ_xy).