Pratidin
2026 · Mechanical Engineering Optional Paper I · 10 marksMainsQuestion 3bii

Determine the damped natural frequency of the system shown in the figure.
[Figure, described: a rigid horizontal bar pivoted at O. A spring of stiffness k connects the left end of the bar, at distance a to the left of O, to the fixed ground A below. A dashpot C, attached to the bar at distance b to the right of O, connects it to the fixed support B above. A point mass m is at the right end of the bar, at distance l from O.]

10 marks · directive: Determine

Answer

The core of a good answer

Taking the bar as massless, small rotation θ gives ml²θ̈ + cb²θ̇ + ka²θ = 0, so ω_n = (a/l)√(k/m), ζ = cb²/(2al√(km)) and ω_d = √(ka²/(ml²) − (cb²/(2ml²))²) = √(4kma²l² − c²b⁴)/(2ml²).

An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work

What the question asks

A single degree of freedom rotational system. Write the moment equation about the pivot O (or use energy and Rayleigh dissipation), identify the equivalent inertia, damping and stiffness, then use ω_d = ω_n√(1 − ζ²). State the assumptions: rigid massless bar, small angles, spring and damper vertical.

Answer outline

Introduction

Coordinate: rotation θ of the bar about O. Displacements: spring end aθ, damper end bθ, mass lθ.

Step 1: Equation of motion

Step 2: Equivalent constants

Step 3: Damping ratio

Step 4: Damped natural frequency

Conclusion

ω_d = √(4kma²l² − c²b⁴)/(2ml²). Check: with c = 0 it reduces to (a/l)√(k/m), the undamped lever result. (Verified symbolically with sympy.)

Examples and data to cite

Facts

Facts to remember

Sources used for the explanation

Write a timed answer in the app