A simple beam is loaded as shown in the figure. Using the double-integration method, determine the following :
(i) The equation of the elastic curve
(ii) The slope at the end A
(iii) The deflection at the midspan
[Figure, described: a simply supported beam AB of span L, pinned at A (x = 0) and on a roller at B (x = L), carrying a linearly varying distributed load of intensity W₀ at A decreasing to zero at B; x is measured from A along the beam and y upward.]
20 marks · directive: Determine
The core of a good answer
With R_A = W₀L/3 and M = W₀Lx/3 − W₀x²/2 + W₀x³/(6L), double integration gives EIy = −W₀x(8L⁴ − 20L²x² + 15Lx³ − 3x⁴)/(360L); the slope at A is −W₀L³/(45EI) (clockwise) and the midspan deflection is 5W₀L⁴/(768EI) downward.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
Classic double-integration problem. Find the reactions, write M(x) for the triangular load, integrate EIy'' = M twice, and fix the two constants with the support conditions y(0) = 0 and y(L) = 0. Then evaluate y' at x = 0 and y at x = L/2.
Answer outline
Introduction
Load intensity w(x) = W₀(1 − x/L) downward. Total load W₀L/2 acting at L/3 from A. Sign convention: y upward, sagging moment positive, EIy'' = M.
Step 1: Reactions
- ΣM_B = 0: R_A L = (W₀L/2)(2L/3), so R_A = W₀L/3
- R_B = W₀L/2 − W₀L/3 = W₀L/6
Step 2: Bending moment
- M(x) = R_A x − ∫₀ˣ w(s)(x − s) ds
- M(x) = W₀Lx/3 − W₀x²/2 + W₀x³/(6L)
Step 3: First integration
- EIy' = W₀Lx²/6 − W₀x³/6 + W₀x⁴/(24L) + C₁
Step 4: Second integration
- EIy = W₀Lx³/18 − W₀x⁴/24 + W₀x⁵/(120L) + C₁x + C₂
- y(0) = 0 gives C₂ = 0
- y(L) = 0: W₀L⁴(1/18 − 1/24 + 1/120) + C₁L = 0, so C₁ = −W₀L³/45
Step 5: Elastic curve (i)
- EIy = (W₀/360L)(20L²x³ − 15Lx⁴ + 3x⁵ − 8L⁴x)
- y = −W₀x(8L⁴ − 20L²x² + 15Lx³ − 3x⁴)/(360 L EI)
Step 6: Slope at A (ii)
- θ_A = y'(0) = C₁/EI = −W₀L³/(45EI) (clockwise); for comparison θ_B = +7W₀L³/(360EI)
Step 7: Midspan deflection (iii)
- EIy(L/2) = (W₀L⁴/360)(2·5 − 0·9375 + 0·09375 − 4) = −2·34375W₀L⁴/360
- y(L/2) = −5W₀L⁴/(768EI), i.e. 5W₀L⁴/(768EI) downward
Conclusion
Elastic curve as in Step 5, θ_A = W₀L³/(45EI) clockwise, δ_mid = 5W₀L⁴/(768EI) ≈ 0·00651W₀L⁴/EI. Check: the maximum deflection, 0·00652W₀L⁴/EI at x = 0·481L, is just beyond midspan towards the heavier end, so δ_mid is very close to it. (Verified with sympy.)
Examples and data to cite
- Superposing the result with its mirror image gives the uniform load case: 2 × 5W₀L⁴/768 = 5W₀L⁴/384, the standard midspan deflection of a uniformly loaded simple beam.
Facts to remember
- Curvature is proportional to bending moment: EI d²y/dx² = M(x); integrating twice gives the elastic curve.
- Boundary conditions for a simple beam: y = 0 at both supports.
- Triangular load W₀ to 0 over span L: resultant W₀L/2 at L/3 from the larger end, reactions W₀L/3 and W₀L/6.
- Loads may be combined by superposition in linear beam theory.