Determine the magnitude P of the horizontal force required to initiate motion of the block of mass m₀ for the cases :
(A) P is applied to the right, and
(B) P is applied to the left.
Compute a general solution in each case, and then evaluate your expression for the values θ = 30°, m = m₀ = 3 kg, μ_s = 0·60, and μ_k = 0·50.
[Figure, described: a block of mass m₀ rests on a horizontal floor. A uniform bar of mass m is pinned at its upper end B to a vertical wall on the right; its lower end A rests on the top of the block, the bar making angle θ with the horizontal. The coefficient μ_k is marked at the contact A between bar and block, and μ_s at the contact between block and floor. P(A) is drawn on the right face of the block pointing left (pushing the block away from the wall); P(B) is drawn on the left face pointing right (pushing the block towards the wall).]
10 marks · directive: Determine
The core of a good answer
Moments about B give the bar-on-block normal force N = mg cos θ/[2(cos θ ± μ_A sin θ)] (+ when the block moves away from the wall, − when towards it) and then P = μ_A N + μ_s(m₀g + N); with the coefficients as marked (μ_k = 0·50 at A, μ_s = 0·60 at the floor) P = 30·2 N in case (A) and 40·4 N in case (B).
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
A two-body friction problem. Draw the free body of the bar (pin reactions at B, normal and friction at A) and of the block (P, N and friction from the bar, floor reaction and friction). The direction of friction at A depends on which way the block moves, which is why the two cases differ. Moments about B eliminate the pin reactions.
Answer outline
Introduction
Assume slip at both surfaces when motion starts (the pinned bar cannot move with the block). Use the coefficients as marked in the figure: μ_A = μ_k = 0·50 at A, μ_s = 0·60 at the floor. Bar length L cancels. In the figure P(A) acts on the right face pushing the block left (away from the wall) and P(B) on the left face pushing it right (towards the wall).
Step 1: Bar, case (A) block moves left
- The block slides left under A, so friction on the bar at A acts to the left
- ΣM_B = 0: N L cos θ + μ_A N L sin θ = mg (L/2) cos θ
- N_A = mg cos θ/[2(cos θ + μ_A sin θ)]
Step 2: Bar, case (B) block moves right
- Friction on the bar at A acts to the right
- ΣM_B = 0: N L cos θ − μ_A N L sin θ = mg (L/2) cos θ
- N_B = mg cos θ/[2(cos θ − μ_A sin θ)]
Step 3: Block (both cases)
- Floor normal = m₀g + N; friction opposes motion at both faces
- General solution: P = μ_A N + μ_s(m₀g + N) = μ_s m₀g + (μ_A + μ_s)N
Step 4: Numbers (θ = 30°, m = m₀ = 3 kg, g = 9·81 m/s²)
- Case (A): N = 29·43 × 0·866/[2(0·866 + 0·25)] = 11·42 N; P = 0·5(11·42) + 0·6(29·43 + 11·42) = 30·2 N
- Case (B): N = 29·43 × 0·866/[2(0·866 − 0·25)] = 20·69 N; P = 0·5(20·69) + 0·6(29·43 + 20·69) = 40·4 N
Step 5: If μ_s = 0·60 is used at both surfaces
- Case (A): N = 10·93 N, P = 30·8 N; case (B): N = 22·51 N, P = 44·7 N
Conclusion
P = 30·2 N in case (A) (block pushed away from the wall) and 40·4 N in case (B) (block pushed towards the wall), with the coefficients as marked in the figure (30·8 N and 44·7 N if 0·60 is applied at both faces). Pushing towards the wall is harder because friction at A then raises the normal force between bar and block. (Recomputed in Python.)
Examples and data to cite
- If cos θ = μ_A sin θ (tan θ = 1/μ_A, θ ≈ 63·4° for μ_A = 0·5) the denominator in case (B) vanishes: the bar would lock and no finite P could move the block towards the wall.
Facts to remember
- Dry (Coulomb) friction: F ≤ μN; at the onset of slip F = μN, opposing the relative motion.
- The static coefficient sets the threshold before surfaces slip and is usually higher than the kinetic coefficient.
- A free body diagram shows all applied forces, moments and reactions; moments about a pin eliminate its unknown reactions.
- The normal force between bodies depends on the friction direction when the contact force has a moment about the pin.