A cylindrical workpiece of 60 mm diameter is turned down to 50 mm over a length of 120 mm on a CNC lathe with cutting speed of 120 m/min and feed of 0·3 mm/rev. Find the machining time.
10 marks · directive: Find
The core of a good answer
Spindle speed N = 1000V/(πD) = 1000 × 120/(π × 60) = 636·6 rpm, feed rate = 0·3 × 636·6 = 191·0 mm/min, so one 5 mm deep pass over 120 mm takes 120/191·0 = 0·628 min ≈ 37·7 s.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
A turning time calculation. Convert cutting speed to spindle speed using the starting diameter, multiply by feed to get the feed rate, and divide the length of cut by it. State the assumptions: one pass of depth (60 − 50)/2 = 5 mm, no approach or overtravel allowance.
Answer outline
Introduction
Data: D = 60 mm, final diameter 50 mm, L = 120 mm, V = 120 m/min, f = 0·3 mm/rev. Depth of cut = (60 − 50)/2 = 5 mm, assumed in a single pass.
Step 1: Spindle speed
- N = 1000V/(πD) = 120000/(π × 60) = 636·6 rev/min
Step 2: Feed rate
- f_m = fN = 0·3 × 636·6 = 191·0 mm/min
Step 3: Machining time
- T_m = L/f_m = 120/191·0 = 0·628 min = 37·7 s
Step 4: Variations to mention
- If two passes of 2·5 mm are used, time doubles to about 1·26 min (ignoring speed change).
- Taking speed at the mean diameter 55 mm (N = 694·5 rpm) gives 0·576 min; a CNC lathe in constant surface speed mode raises spindle speed as the diameter falls.
- Approach and overtravel, if given, are added to L.
Conclusion
Machining time ≈ 0·63 min (about 38 s) for a single pass. Check: material removal rate = V f d = 120000 × 0·3 × 5 = 180 cm³/min. (Recomputed in Python.)
Examples and data to cite
- Process planners use T_m = L/(fN) to estimate cycle times and machine loading.
- On CNC lathes the spindle speed can be raised automatically as the tool moves towards the centre to keep the surface speed constant.
Facts to remember
- Cutting speed V = πDN/1000 (V in m/min, D in mm), so N = 1000V/(πD).
- Feed in turning is the distance the tool advances per revolution (mm/rev), so feed rate f_m = f × N (mm/min).
- Turning time T_m = (L + allowances)/(fN) per pass.
- Depth of cut in turning = (D − d)/2.