Pratidin
2026 · Mechanical Engineering Optional Paper II · 20 marksMainsQuestion 4b

A horizontal insulated cylinder has a frictionless and adiabatic piston held against stops by an external force of 500 kN, as shown in the figure below. The cross-sectional area of the piston is 0.5 m², and the initial volume is 0.25 m³. Helium gas in the cylinder is at 200 kPa, 100 °C. A valve is now opened to a line through which helium is flowing at 1.2 MPa, 200 °C, and the helium flows in, until the cylinder pressure just balances the external force on the piston, at which point the valve is closed. Assume ambient at T₀ = 300 K; for helium, Cₚ = 5.193 kJ/kg-K, R = 2.0771 kJ/kg-K and Cᵥ = 3.116 kJ/kg-K :
[Figure, described in words: a vertical supply line on the left is joined through a valve to the left end wall of a horizontal cylinder containing helium; at the right end the piston rests against stops on the helium side, and the external force F_ext pushes it from the right, towards the helium.]
Determine :
(i) The final mass in the cylinder (in kg)
(ii) The final temperature in the cylinder (in K)
(iii) The total entropy generation (in kJ/K)
(iv) The irreversibility (in kJ)

20 marks · directive: Determine

Answer

The core of a good answer

The piston stays on the stops until P = 500/0.5 = 1000 kPa, so the cylinder fills at constant volume: m₁ = 0.0645 kg, and solving m₂CᵥT₂ − m₁CᵥT₁ = (m₂ − m₁)CₚT_i with m₂ = P₂V/(RT₂) gives T₂ ≈ 645 K and m₂ ≈ 0.187 kg; S_gen ≈ 0.210 kJ/K and the irreversibility T₀S_gen ≈ 63.1 kJ.

An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work

What the question asks

A transient (uniform-state, uniform-flow) charging problem. Recognise that no boundary work is done because the piston cannot move until the gas pressure equals F/A; then apply mass and energy balances to the control volume, the ideal gas law for the final state, the entropy balance for the adiabatic control volume, and the Gouy-Stodola relation I = T₀S_gen.

Answer outline

Introduction

Initial: P₁ = 200 kPa, T₁ = 373.15 K, V = 0.25 m³. Line: P_i = 1200 kPa, T_i = 473.15 K. Final: P₂ = F/A = 500/0.5 = 1000 kPa, V unchanged (piston just balances, no movement). Insulated: Q = 0; no work.

Step 1: Initial mass

Step 2: Energy balance

Step 3: (i) and (ii) Final state

Step 4: (iii) Entropy generation

Step 5: (iv) Irreversibility

Conclusion

Final mass ≈ 0.187 kg, final temperature ≈ 645 K, S_gen ≈ 0.210 kJ/K, irreversibility ≈ 63 kJ. The temperature rises above the line temperature because the flow work of the entering gas is converted into internal energy. Recomputed in Python.

Examples and data to cite

Facts

Facts to remember

Sources used for the explanation

Write a timed answer in the app