What are the functions of lubricant used in IC engines? Mention the essential properties of IC engine lubricant.
10 marks · directive: Mention
The core of a good answer
Engine oil reduces friction and wear, cools moving parts, keeps the engine clean of sludge and varnish, neutralises acids, helps the piston rings seal and protects metal against corrosion; it must have suitable viscosity and a high viscosity index, a low pour point, a high flash point, oxidation stability, detergency and dispersancy, and adequate total base number.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
Two lists with short reasons. Functions first (what the oil does in the engine), then properties (what it must possess to do that under hot, varying conditions). A line on additives adds value.
Answer outline
Introduction
The lubricating system supplies oil to the bearings, cylinder walls, piston rings and valve gear.
Functions
- Lubrication: separates moving surfaces by a film, reducing friction and wear and so saving power and fuel
- Cooling: carries heat away from moving parts
- Sealing: helps the piston rings seal against the cylinder walls
- Cleaning: keeps sludge and varnish from building up
- Acid neutralisation: neutralises acids from fuel and oil oxidation
- Corrosion protection: protects metal surfaces from oxygen and corrosion
Essential properties
- Viscosity: high enough to keep a lubricating film, low enough to circulate
- High viscosity index: small change of viscosity with temperature
- Low pour point: the oil still flows at low temperature
- High flash point: safer, the vapours do not ignite readily
- Oxidation stability: resists breakdown at high temperature
- Detergency and dispersancy: keeps the engine clean and limits sludge
- Adequate total base number: reserve alkalinity to neutralise acids
Additives
- Viscosity index improvers (polymers that make multigrade oils), detergents, dispersants, oxidation inhibitors and anti-wear agents such as zinc dialkyldithiophosphate (ZDDP), whose phosphorus content is limited to protect catalytic converters
Conclusion
A good engine oil combines a stable base oil of the right viscosity grade with an additive package; in an SAE grade such as 5W-30, 5W rates cold-temperature viscosity and 30 the viscosity at operating temperature.
Examples and data to cite
- SAE J300 defines viscosity grades such as 5W-30.
- API service categories classify oil performance: SP is the latest for petrol car engines and CK-4 a current diesel category.
Facts to remember
- Viscosity index measures change of viscosity with temperature.
- Pour point: lowest temperature at which the oil still flows.
- Flash point: lowest temperature at which the oil vapours can ignite.
- Total base number measures reserve alkalinity (acid-neutralising capacity).