Describe the behaviour of steam flow in a convergent nozzle when it is operated at—
(i) design pressure ratio;
(ii) pressure ratio higher than the design value;
(iii) pressure ratio lower than the design value.
10 marks · directive: Describe
The core of a good answer
A convergent nozzle is designed to expand to the critical pressure at exit: at the design pressure ratio the exit velocity is sonic and the flow is choked at maximum discharge; at a higher pressure ratio (back pressure above critical) the exit is subsonic, exit pressure equals back pressure and discharge is less; at a lower ratio the flow stays choked, discharge does not increase, and the steam leaves under-expanded and expands further outside the nozzle through expansion waves, wasting energy.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
Describe the three regimes of a convergent nozzle in terms of the ratio of back pressure to inlet (stagnation) pressure, with the mass flow against pressure ratio curve and the pressure distribution along the nozzle.
Answer outline
Introduction
Let p₁ be inlet pressure, p_b back pressure and p_c the critical pressure. For a gas expanding with index n, p_c/p₁ = (2/(n + 1))^(n/(n − 1)); for dry air (n = γ = 1.4) this is 0.528. The design pressure ratio of a convergent nozzle is this critical ratio.
(i) At design pressure ratio (p_b/p₁ = critical)
- Steam expands smoothly to the critical pressure exactly at the exit
- Exit velocity equals local sonic velocity; mass flow per unit area is a maximum (choked)
- No losses from under or over expansion
(ii) Pressure ratio higher than design (p_b/p₁ > critical)
- Exit pressure equals the back pressure, which is above critical
- Flow is subsonic throughout; exit velocity is less than sonic
- Mass flow is less than the maximum and increases as back pressure is lowered towards the critical value
(iii) Pressure ratio lower than design (p_b/p₁ < critical)
- A convergent passage cannot accelerate the flow beyond sonic, so exit pressure stays at the critical pressure and the flow remains choked
- Mass flow does not increase further
- Steam leaves under-expanded (exit pressure above back pressure) and expands from p_c to p_b outside the nozzle through expansion waves, with energy loss
- To use a lower back pressure efficiently a convergent-divergent (de Laval) nozzle, which produces supersonic velocities, is needed
Conclusion
Below the critical pressure ratio a convergent nozzle is choked: lowering back pressure only adds external expansion losses,.
Examples and data to cite
- Reaction turbine blade passages are convergent, with small pressure drops per stage.
- Under choked conditions, valves and calibrated orifice plates are used to produce a desired mass flow rate.
Facts to remember
- Critical pressure ratio (2/(n + 1))^(n/(n − 1)); 0.528 for dry air.
- At the exit of a choked convergent nozzle the velocity is sonic.
- Once choked, lowering the back pressure does not raise the mass flow.
- An under-expanded jet has exit pressure greater than back pressure and expands through waves at the exit.