In an Otto cycle, the pressure and temperature at the beginning of compression are 1 bar and 47 °C, respectively. Calculate the theoretical thermal efficiency of this cycle, if the pressure at the end of the compression is 15 bar.
The peak temperature during the cycle is 2100 K.
Calculate—
(i) the heat supplied per kg of air;
(ii) the work done per kg of air;
(iii) the pressure at the end of expansion.
Take Cᵥ = 0.717 kJ/kg-K and γ = 1.4.
20 marks · directive: Calculate
The core of a good answer
Compression ratio r = 15^(1/1.4) = 6.92, so η = 1 − 1/r^0.4 = 1 − 15^(−0.2857) = 53.9%; T₂ = 694.0 K, heat supplied = 0.717(2100 − 694.0) = 1008 kJ/kg, work = 0.5387 × 1008 = 543 kJ/kg, T₄ = 968.7 K and pressure at end of expansion = 3.03 bar.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
Air-standard Otto cycle. Get the compression ratio from the isentropic pressure ratio, then efficiency, temperatures at each corner, heat added at constant volume, work as heat added minus heat rejected (or η × heat added), and the end-of-expansion pressure from state 4 and state 1 at the same volume.
Answer outline
Introduction
State 1: P₁ = 1 bar, T₁ = 47 + 273.15 = 320.15 K; P₂ = 15 bar; T₃ = 2100 K; Cᵥ = 0.717 kJ/kg-K, γ = 1.4. Processes: 1-2 isentropic compression, 2-3 constant-volume heat addition, 3-4 isentropic expansion, 4-1 constant-volume rejection.
Step 1: Compression ratio and efficiency
- r = V₁/V₂ = (P₂/P₁)^(1/γ) = 15^(1/1.4) = 6.919
- η = 1 − 1/r^(γ − 1) = 1 − (P₁/P₂)^((γ − 1)/γ) = 1 − 15^(−0.2857) = 1 − 0.4613 = 0.5387 (53.9%)
Step 2: Temperature after compression
- T₂ = T₁(P₂/P₁)^((γ − 1)/γ) = 320.15 × 2.1678 = 694.0 K
Step 3: (i) Heat supplied
- q₁ = Cᵥ(T₃ − T₂) = 0.717 × (2100 − 694.0) = 1008.1 kJ/kg
Step 4: Temperature after expansion
- T₄ = T₃/r^(γ − 1) = 2100/2.1678 = 968.7 K
Step 5: (ii) Work done
- Heat rejected q₂ = Cᵥ(T₄ − T₁) = 0.717 × (968.7 − 320.15) = 465.0 kJ/kg
- w = q₁ − q₂ = 1008.1 − 465.0 = 543.1 kJ/kg (= 0.5387 × 1008.1)
Step 6: (iii) Pressure at end of expansion
- V₄ = V₁, so P₄ = P₁T₄/T₁ = 1 × 968.7/320.15 = 3.03 bar
- Check: P₃ = P₂T₃/T₂ = 15 × 2100/694.0 = 45.4 bar; P₄ = P₃/r^γ = 45.4/15 = 3.03 bar
Conclusion
η ≈ 53.9%, heat supplied ≈ 1008 kJ/kg, net work ≈ 543 kJ/kg, P₄ ≈ 3.03 bar. Using 320 K instead of 320.15 K changes the results only in the fourth figure. Recomputed in Python.
Examples and data to cite
- Typical petrol engines have compression ratios of about 9 to 10:1, limited by knock; the air-standard analysis overestimates the power actually obtained.
- For an Otto cycle the pressure ratio of expansion equals that of compression (here 15).
Facts to remember
- Otto efficiency η = 1 − 1/r^(γ − 1).
- Isentropic: T₂/T₁ = (P₂/P₁)^((γ − 1)/γ) = r^(γ − 1).
- Heat at constant volume: q = Cᵥ(T₃ − T₂).
- T₃/T₄ = T₂/T₁ for the Otto cycle.