In a cogeneration plant, the net power output is 6 MW and the heating load is 1.5 MW. Steam is generated at 40 bar and 500 °C, and is expanded isentropically through a turbine to a condenser at 0.1 bar. The heating load is supplied by extracting steam from the turbine at 2 bar, which is condensed in a process heater to saturated liquid at 2 bar and then pumped back to the boiler. Draw the schematic and T-s diagram. Determine (i) the steam generation capacity (in kg/s) of the boiler and (ii) mass flow rate (in kg/s) of the steam through the heating load.
The steam properties at 40 bar, 500 °C are h = 3445.21 kJ/kg, s = 7.09 kJ/kg-K.
Use steam tables given at the end to get other properties.
20 marks · directive: Determine
The core of a good answer
Isentropic expansion gives h = 2692.1 kJ/kg at 2 bar (x = 0.9934) and 2246.4 kJ/kg at 0.1 bar (x = 0.8587); the process heater needs 1500/(2692.1 − 504.68) = 0.686 kg/s, and the net power balance including both feed pumps gives a boiler steam generation of about 5.28 kg/s.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
A cogeneration (extraction) Rankine cycle. Fix the turbine states from s = constant with the given steam tables, get the extraction flow from the heating load, then solve the net power equation (turbine work of both streams minus the two pump works) for the total steam flow.
Answer outline
Introduction
State 1: 40 bar, 500 °C, h₁ = 3445.21 kJ/kg, s₁ = 7.09 kJ/kg-K. Extraction at 2 bar (200 kPa): h_f = 504.68, h_fg = 2201.96, s_f = 1.5300, s_fg = 5.5970, v_f = 0.001061. Condenser 0.1 bar (10 kPa): h_f = 191.81, h_fg = 2392.82, s_f = 0.6492, s_fg = 7.5010, v_f = 0.001010. Schematic: boiler, turbine with bleed at 2 bar to process heater, remainder to condenser; condensate pump and process-heater pump both deliver to the boiler. T-s: 1 to 2 (2 bar) to 3 (0.1 bar) on one vertical line; liquid states at 0.1 and 2 bar pumped to 40 bar.
Step 1: Extraction state (2 bar)
- x₂ = (7.09 − 1.5300)/5.5970 = 0.9934
- h₂ = 504.68 + 0.9934 × 2201.96 = 2692.1 kJ/kg
Step 2: Condenser inlet (0.1 bar)
- x₃ = (7.09 − 0.6492)/7.5010 = 0.8587
- h₃ = 191.81 + 0.8587 × 2392.82 = 2246.4 kJ/kg
Step 3: (ii) Steam to heating load
- Process heater: ṁ_p(h₂ − h_f,2bar) = 1500 kW
- ṁ_p = 1500/(2692.1 − 504.68) = 0.686 kg/s
Step 4: Pump works
- Condensate pump: w_p1 = v_f ΔP = 0.001010 × (4000 − 10) = 4.03 kJ/kg
- Process heater pump: w_p2 = 0.001061 × (4000 − 200) = 4.03 kJ/kg
Step 5: (i) Boiler steam generation
- Net power: ṁ(h₁ − h₂) + (ṁ − ṁ_p)(h₂ − h₃) − (ṁ − ṁ_p)w_p1 − ṁ_p w_p2 = 6000 kW
- ṁ(753.1 + 445.7 − 4.03) = 6000 + 0.686 × (445.7 − 4.03 + 4.03)
- ṁ = 5.278 kg/s; steam to condenser = 5.278 − 0.686 = 4.592 kg/s
- Neglecting pump work: ṁ = 5.260 kg/s
Conclusion
Boiler steam generation ≈ 5.28 kg/s and steam through the heating load ≈ 0.686 kg/s. Recomputed in Python with the steam table values printed with the paper.
Examples and data to cite
- Sugar and alcohol producers in Brazil burn sugarcane bagasse to generate heat and power, selling surplus electricity.
- Boiler heat input here is about 16.9 MW (feed water returns at 195.8 and 508.7 kJ/kg), so the utilisation factor is (6 + 1.5)/16.9 ≈ 0.44 against an electrical efficiency of 6/16.9 ≈ 0.35.
Facts to remember
- Isentropic expansion: s₂ = s₁; x = (s − s_f)/s_fg; h = h_f + xh_fg.
- Process heat Q = ṁ_p(h_extraction − h_f).
- Pump work w_p = v_f(P_high − P_low).
- Steady-flow energy balance over turbine and pumps.