A uniform rod of length L and mass m stands vertically upright on a rough floor and then tips over. What is the rod's angular velocity when it hits the floor?
10 marks · directive: Calculate
The core of a good answer
Because the floor is rough, the lower end does not slip and the rod rotates about it; energy conservation, mg(L/2) = (1/2)(mL²/3)ω², gives ω = √(3g/L) when the rod hits the floor (the free end then moves at √(3gL)).
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
A rigid body rotation problem solved by conservation of mechanical energy. The key physical point is the word 'rough': friction keeps the bottom end fixed, so the motion is pure rotation about that end and the moment of inertia to use is about the end, mL²/3, not about the centre.
Answer outline
Introduction
Treat the rod as rotating about its lower end O, which stays fixed because of friction. Start: rod vertical, at rest (an infinitesimal push starts the fall). End: rod horizontal on the floor. Friction and the normal force act at O and do no work.
Step 1: Moment of inertia about the pivot
- About the centre: I_cm = mL²/12.
- Parallel axis theorem: I_O = I_cm + m(L/2)² = mL²/12 + mL²/4 = mL²/3.
Step 2: Loss of potential energy
- The centre of mass falls from height L/2 to (nearly) 0.
- ΔU = mg(L/2).
Step 3: Energy conservation
- mg(L/2) = (1/2) I_O ω² = (1/2)(mL²/3)ω²
- ω² = 3g/L
- ω = √(3g/L)
Step 4: Related results worth stating
- Speed of the free end: v = ωL = √(3gL).
- Speed of the centre of mass: v_cm = ωL/2 = (1/2)√(3gL).
- At a general angle θ from the vertical: ω² = (3g/L)(1 − cos θ), which gives the same answer at θ = 90°.
- Example: for L = 1 m and g = 9.8 m/s², ω = √29.4 ≈ 5.42 rad/s.
Conclusion
ω = √(3g/L), independent of the mass. Check: dimensions of g/L are s⁻², so ω is in rad/s; a longer rod lands with smaller angular speed, as expected.
Examples and data to cite
- The free end of the rod lands at √(3gL), faster than the free fall speed √(2gL) from the same height L.
Facts to remember
- Moment of inertia of a uniform rod about one end: mL²/3.
- Parallel axis theorem: I = I_cm + Md².
- Static friction at a non-slipping contact does no work, so mechanical energy is conserved.
- Rotational kinetic energy: (1/2)Iω².