The aperture width of a laser light source of wavelength 6000 Å is 3 mm and its power is 20 mW. Calculate the light intensity at a distance of 200 m from the light source.
15 marks · directive: Calculate
The core of a good answer
The beam spreads by diffraction through an angle Δθ ≈ λ/d = 6 × 10⁻⁷/3 × 10⁻³ = 2 × 10⁻⁴ rad, so at 200 m the spot is about 200 × 2 × 10⁻⁴ = 0.04 m across with area ≈ (0.04)² = 1.6 × 10⁻³ m², giving intensity ≈ 0.020/1.6 × 10⁻³ = 12.5 W/m².
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
Diffraction limited divergence of a laser beam. The usual textbook method is: angular spread λ/d, areal spread (DΔθ)² at distance D, intensity = power/area. Since the spot size is an estimate, the answer is an order of magnitude and the assumption about spot area must be stated.
Answer outline
Introduction
Given λ = 6000 Å = 6 × 10⁻⁷ m, aperture d = 3 mm = 3 × 10⁻³ m, power P = 20 mW = 2 × 10⁻² W, distance D = 200 m. A laser beam is almost parallel, so its spread comes only from diffraction at the exit aperture.
Step 1: Angular spread
- Δθ ≈ λ/d = 6 × 10⁻⁷/3 × 10⁻³ = 2 × 10⁻⁴ rad
Step 2: Size of the beam at 200 m
- Linear spread = DΔθ = 200 × 2 × 10⁻⁴ = 0.04 m = 4 cm (large compared with the 3 mm aperture, so the aperture itself can be neglected).
- Areal spread ≈ (DΔθ)² = (0.04)² = 1.6 × 10⁻³ m²
Step 3: Intensity
- I = P/area = 2 × 10⁻²/1.6 × 10⁻³ = 12.5 W/m²
Step 4: Sensitivity to the spot definition
- Taking the spot as a circle of diameter 0.04 m: area π(0.02)² = 1.26 × 10⁻³ m², I ≈ 15.9 W/m².
- Either way the intensity is of order 10 W/m², though the source emits only 20 mW.
Conclusion
About 12.5 W/m² (order 10 W/m²) at 200 m. This shows the directionality of laser light: an ordinary 20 mW source radiating in all directions would give P/(4πD²) ≈ 4 × 10⁻⁸ W/m² at the same distance.
Facts to remember
- Diffraction divergence of a beam is proportional to wavelength and inversely proportional to the beam diameter: Δθ ≈ λ/d for an aperture d (1.22λ/d for the first dark ring of a circular aperture).
- Intensity = power/area, in W/m².
- Isotropic source: I = P/(4πr²).