A Fabry-Pérot interferometer is illuminated by monochromatic light of wavelength λ = 500 nm. The mirror separation is d = 0.8 mm. It is observed that two successive transmitted maxima correspond to wavelengths λ and λ + Δλ, both satisfying the condition for normal incidence. Determine the smallest wavelength difference Δλ that can be resolved by the interferometer. Explain physically why this quantity depends on mirror separation.
10 marks · directive: Determine
The core of a good answer
At normal incidence maxima satisfy 2d = mλ, so m = 2d/λ = 3200 and successive orders are separated by Δλ = λ²/2d = (5 × 10⁻⁷)²/(1.6 × 10⁻³) = 1.56 × 10⁻¹⁰ m ≈ 0.156 nm; this is the free spectral range set by the question's data, and the true resolution limit is this divided by the finesse, so both shrink as d grows because a larger gap means a higher order m.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
The question defines Δλ through two successive transmitted maxima, which is the free spectral range. The expected method is to write 2d = mλ for both wavelengths and subtract. A good answer also notes that the resolvable limit is δλ = λ/(mF) = FSR/F, where F is the finesse, and explains the d dependence through the order m = 2d/λ.
Answer outline
Introduction
Given λ = 500 nm = 5 × 10⁻⁷ m, d = 0.8 mm = 8 × 10⁻⁴ m, normal incidence, air between mirrors (μ = 1).
Step 1: Condition for a transmitted maximum
- 2μd cos θ = mλ; at normal incidence with μ = 1: 2d = mλ.
- m = 2d/λ = 1.6 × 10⁻³/5 × 10⁻⁷ = 3200
Step 2: Successive maxima
- 2d = mλ and 2d = (m − 1)(λ + Δλ)
- Subtracting: mΔλ ≈ λ (to first order), so Δλ = λ/m = λ²/2d.
Step 3: Numerical value
- Δλ = (5 × 10⁻⁷)²/(2 × 8 × 10⁻⁴) = 2.5 × 10⁻¹³/1.6 × 10⁻³
- Δλ = 1.5625 × 10⁻¹⁰ m ≈ 0.156 nm = 1.56 Å
Step 4: Link with resolving power
- Two lines closer than this free spectral range in the same order cannot be told apart from overlapping orders.
- Within one order the instrument resolves δλ = λ/(mF), where F = π√R/(1 − R) is the reflectivity finesse; for example R = 0.9 gives F ≈ 30 and δλ ≈ 0.005 nm (an illustration, since R is not given).
Step 5: Why d matters
- Order m = 2d/λ: a larger gap means each round trip adds more wavelengths, so a given Δλ produces a bigger phase change 4πdΔλ/λ² between the two wavelengths.
- Hence Δλ ∝ 1/d: increasing d improves resolution (smaller resolvable difference) but reduces the free spectral range, a basic trade-off in interferometer design.
Conclusion
Δλ = λ²/2d ≈ 0.156 nm for d = 0.8 mm. Check: m(λ + Δλ) with m = 3199 gives 3199 × 500.156 nm = 1.6000 mm = 2d.
Examples and data to cite
- Fabry-Pérot etalons are placed inside laser resonators to force single mode operation and are used in optical wavemeters.
Facts to remember
- Fabry-Pérot maxima: 2μd cos θ = mλ.
- Free spectral range Δλ = λ²/(2μd) at normal incidence.
- Resolving power λ/δλ = mF, finesse F = π√R/(1 − R).
- Order of interference m = 2d/λ.