Calculate the effective resistance of the following combination of resistances as shown in the figure and determine the voltage drop across each resistance when a potential difference of 120 volts is applied between points A and B:
[Figure, in words: From A, a 3 Ω and a 6 Ω resistor in parallel, followed in series by an 18 Ω resistor; this whole branch is connected in parallel with a single 5 Ω resistor; the combination is then in series with an 8 Ω resistor that ends at B.]
10 marks · directive: Calculate
The core of a good answer
3 Ω ∥ 6 Ω = 2 Ω, plus 18 Ω gives 20 Ω, in parallel with 5 Ω gives 4 Ω, plus 8 Ω gives R_eq = 12 Ω; the current is 120/12 = 10 A, so the drops are 80 V across 8 Ω, 40 V across 5 Ω, 36 V across 18 Ω and 4 V across each of 3 Ω and 6 Ω.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
Series parallel reduction followed by Ohm's law branch by branch. The skill is reading the circuit correctly: the 5 Ω resistor bridges the whole (3 ∥ 6) + 18 branch, and the 8 Ω resistor carries the full current.
Answer outline
Introduction
Reduce from the innermost parallel pair outwards, find the total current, then work back to each resistor using V = IR and current division.
Step 1: Effective resistance
- 3 ∥ 6 = (3 × 6)/(3 + 6) = 2 Ω
- Upper branch: 2 + 18 = 20 Ω
- 20 ∥ 5 = (20 × 5)/(20 + 5) = 4 Ω
- R_eq = 4 + 8 = 12 Ω
Step 2: Total current
- I = 120/12 = 10 A (this flows through the 8 Ω resistor).
Step 3: Drops in the series part and the 5 Ω branch
- V(8 Ω) = 10 × 8 = 80 V
- Voltage across the parallel block = 10 × 4 = 40 V
- V(5 Ω) = 40 V, current 8 A
Step 4: Upper branch
- Current = 40/20 = 2 A
- V(18 Ω) = 2 × 18 = 36 V
- V(3 Ω) = V(6 Ω) = 2 × 2 = 4 V; currents 4/3 = 1.33 A and 4/6 = 0.67 A
Conclusion
R_eq = 12 Ω. Drops: 8 Ω 80 V, 5 Ω 40 V, 18 Ω 36 V, 3 Ω 4 V, 6 Ω 4 V. Check: 80 + 36 + 4 = 120 V and 80 + 40 = 120 V; currents 8 + 2 = 10 A.
Examples and data to cite
- Kirchhoff's laws give the same answer and are the standard check for any network reduction.
Facts to remember
- Series: R = R₁ + R₂; parallel: 1/R = 1/R₁ + 1/R₂.
- Ohm's law V = IR.
- Elements in parallel share the same voltage; elements in series carry the same current.
- Kirchhoff's voltage law: drops around any loop add to the applied emf.