Discuss the origin of hysteresis in ferromagnetic materials on the basis of domain theory. Explain how domain wall motion and pinning lead to energy loss during cyclic magnetization.
20 marks · directive: Discuss
The core of a good answer
A ferromagnet is divided into domains, each spontaneously magnetized by exchange interaction; magnetization changes by domain wall motion and domain rotation, and because walls are pinned by defects and inclusions they move in irreversible jumps (Barkhausen jumps), so M lags H, leaving remanence and coercivity, and the energy dissipated per cycle equals the area of the B-H loop.
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
A theory question. 'Discuss' asks for the physical mechanism with reasoning: why domains form, how they respond to a field, why the response is irreversible, and how that irreversibility becomes heat. A labelled B-H loop sketch with the regions of reversible wall motion, irreversible jumps and rotation earns marks.
Answer outline
Introduction
Weiss (1906) proposed that a ferromagnet below its Curie temperature contains small regions (domains) each magnetized to saturation, randomly oriented in the demagnetized state. Hysteresis is the dependence of M on the history of H.
Domain formation
- Exchange interaction aligns neighbouring spins inside a domain.
- Splitting into domains lowers magnetostatic (stray field) energy; it is limited by the exchange energy cost of the domain walls, which grows with wall area.
- Magnetocrystalline anisotropy makes magnetization prefer easy axes, so most domains point along them.
Magnetization process along the virgin curve
- Low fields: reversible wall bowing and small displacements; favourably oriented domains grow (initial permeability).
- Intermediate fields: irreversible wall jumps past pinning sites, seen as Barkhausen noise; the steep part of the curve.
- High fields: rotation of domain magnetization from easy axes into the field direction, approaching saturation.
Pinning and irreversibility
- Crystal defects such as impurity atoms and dislocations pin walls.
- A wall stays pinned until the field exerts enough pressure, then jumps suddenly to the next pin; on reducing H it does not retrace its path.
- So at H = 0 a net magnetization remains (remanence M_r), and a reverse field (coercivity H_c) is needed to bring M to zero.
Energy loss in a cycle
- During each jump the energy released is dissipated as heat in the material.
- Work done per unit volume per cycle W = ∮H dB, equal to the area of the B-H loop.
- Hysteresis loss per second grows with the number of cycles per second, which is why low loss soft materials are used in AC devices.
Soft and hard materials
- Soft (low coercivity, soft iron): narrow loop, low hysteresis loss, used as cores in transformers, electric motors and electromagnets.
- Hard (high coercivity, for example sintered neodymium magnets): wide loop, used as permanent magnets and in magnetic recording (tape, hard disks).
Conclusion
Hysteresis arises from irreversible domain wall motion against pinning; the loop area measures the energy dissipated per cycle, which guides the choice of soft materials for AC devices and hard materials for permanent magnets.
Examples and data to cite
- Barkhausen effect (1919): audible clicks from discrete jumps of domain walls past defects.
Facts to remember
- Energy loss per cycle per unit volume = ∮H dB = area of the B-H loop.
- Domains form only below the Curie temperature.
- Remanence is the magnetization left at H = 0; coercivity is the reverse field that brings it to zero.
- Domain walls cost exchange energy, so domain subdivision stops when wall energy balances the magnetostatic energy saved.