(i) What are hot bands in vibrational spectroscopy? Why are they called so?
(ii) The fundamental and 2nd harmonic transitions of ¹⁴N¹⁶O are recorded at 1876·06 cm⁻¹ and 3724·2 cm⁻¹, respectively. Calculate the equilibrium vibrational frequency, the anharmonicity constant and the zero-point energy of the molecule.
[Given : Mass of ¹⁴N = 23·25 × 10⁻²⁷ kg,
Mass of ¹⁶O = 26·56 × 10⁻²⁷ kg]
15 marks · directive: Calculate
The core of a good answer
(i) Hot bands are transitions that start from an excited vibrational level (for example v = 1 → 2), which is populated only at higher temperature, so they strengthen as the sample is heated. (ii) With ν₀→₁ = ωₑ(1 − 2xₑ) = 1876.06 cm⁻¹ and ν₀→₂ = 2ωₑ(1 − 3xₑ) = 3724.2 cm⁻¹: ωₑxₑ = 13.96 cm⁻¹, ωₑ = 1903.98 cm⁻¹ (5.71 × 10¹³ Hz), xₑ = 7.33 × 10⁻³, and zero-point energy = ωₑ/2 − ωₑxₑ/4 = 948.5 cm⁻¹ = 1.885 × 10⁻²⁰ J (0.118 eV).
An outline written by upsc.help, not an official UPSC answer; every fact checked by a separate review. How we work
What the question asks
Part (i) (8 marks) is definitional with a Boltzmann population argument. Part (ii) (7 marks) uses the anharmonic oscillator term values G(v) = ωₑ(v + ½) − ωₑxₑ(v + ½)²; the line called the 2nd harmonic is the 0 → 2 overtone. The masses allow the force constant to be found as a check.
Answer outline
Introduction
Anharmonic (Morse-type) oscillator: ε_v = ωₑ(v + ½) − ωₑxₑ(v + ½)², in cm⁻¹. Transitions from v = 0: ν₀→₁ = ωₑ(1 − 2xₑ), ν₀→₂ = 2ωₑ(1 − 3xₑ).
(i) Hot bands
- Transitions v = 1 → 2, 2 → 3, ... from thermally excited levels
- Population ratio N₁/N₀ = exp(−hcν̃/kT); with ν̃ = 1876 cm⁻¹ at 300 K this is about 1.2 × 10⁻⁴, so hot bands are weak
- Called hot because their intensity rises with temperature as v = 1 fills
- Because of anharmonicity they lie slightly below the fundamental (ν₁→₂ = ωₑ(1 − 4xₑ)), at about 1848 cm⁻¹ for these NO constants
(ii) Solve for ωₑxₑ and ωₑ
- 2ν₀→₁ − ν₀→₂ = 2ωₑxₑ, so ωₑxₑ = (3752.12 − 3724.2)/2 = 13.96 cm⁻¹
- ωₑ = ν₀→₁ + 2ωₑxₑ = 1876.06 + 27.92 = 1903.98 cm⁻¹
- xₑ = 13.96/1903.98 = 7.33 × 10⁻³
- Check: 2 × 1903.98 × (1 − 3 × 0.00733) = 3724.2 cm⁻¹
(ii) Equilibrium frequency
- νₑ = cωₑ = 3 × 10¹⁰ cm/s × 1903.98 cm⁻¹ = 5.71 × 10¹³ Hz
(ii) Zero-point energy
- ε₀ = ωₑ/2 − ωₑxₑ/4 = 951.99 − 3.49 = 948.5 cm⁻¹
- E₀ = hc × 948.5 × 10² m⁻¹ = 1.885 × 10⁻²⁰ J = 0.118 eV
(ii) Force constant (use of masses)
- μ = m_N m_O/(m_N + m_O) = 1.240 × 10⁻²⁶ kg
- k = 4π²c²ωₑ²μ = 1.60 × 10³ N/m
Conclusion
ωₑ = 1904 cm⁻¹ (5.71 × 10¹³ Hz), xₑ = 0.00733 (ωₑxₑ = 13.96 cm⁻¹), zero-point energy 948.5 cm⁻¹ (1.89 × 10⁻²⁰ J). The anharmonic ZPE is slightly below the harmonic value ωₑ/2 = 952 cm⁻¹, as expected.
Facts to remember
- Anharmonic oscillator: ε_v = ωₑ(v + ½) − ωₑxₑ(v + ½)².
- Fundamental ν₀→₁ = ωₑ(1 − 2xₑ); first overtone ν₀→₂ = 2ωₑ(1 − 3xₑ).
- Zero-point energy ε₀ = ωₑ/2 − ωₑxₑ/4.
- Hot band intensity follows the Boltzmann population of v = 1.